User manual MIELE CVA 4080

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MIELE CVA 4080. We hope that this MIELE CVA 4080 user guide will be useful to you.

Lastmanuals help download the user guide MIELE CVA 4080.


Mode d'emploi MIELE CVA 4080
Download
Manual abstract: user guide MIELE CVA 4080

Detailed instructions for use are in the User's Guide.

[. . . ] Operating and installation instructions Built-in coffee machine CVA 4080 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 838 530 Contents Caring for the environment . 15 Adding water, coffee beans or ground coffee . 20 Adjusting the height of the coffee spouts . [. . . ] The higher the calcium content, the harder the water, and the harder the water, the more often the machine will need to be descaled. The machine measures the amount of water which has been taken in (including the amount required for producing steam). The amount of water which the machine can use before it needs to be descaled will depend on the water hardness level set. Less water will be used in hard water areas than in soft water areas. 42 Settings: Customising your machine Your local water authority will be able to tell you the hardness of water in your area. Alternatively, you can measure the hardness yourself using the enclosed test strip: ^ Dip the strip in your drinking water for approximately a second, then shake off any excess water. The result will be evident after about a minute. If the water is harder than 40 °d / 7. 0 mmol/l, limescale will build up more rapidy than with soft water. Descaling will need to be carried out more regularly than stated to prevent limescale damage to the machine. The machine has four programmable levels: Level (machine) Hardness (local water) °d mmol/l Water through-flow in litres Steam through-flow in minutes approx. 30 min Soft 1 Medium 2 Hard 3 Very hard 4 1 (soft) 1 (soft) 2 (medium) 3 (hard) 4 (very hard) 0-3 4-7 7 - 14 0 - 0. 6 0. 7 - 1. 3 1. 3 - 2. 5 14 - 21 2. 5 - 3. 8 above 21 above 3. 8 43 Settings: Customising your machine To set the correct water hardness level, ^ touch the sensor beside "Settings". Settings ß Total no. of coffees ß System lock ß Water hardness ^ Touch the sensor beside "Water hardness". ^ Touch the upper or middle sensor on the right until the correct water hardness is visible on the left of the display. ^ Touch the sensor beside the correct water hardness. A tick will appear beside the water hardness which is currently set. ^ Touch the sensor beside "ok" to save the setting. Selecting or altering a user profile To cater for different tastes and preferences, you can enter up to 10 individual user profiles and also allocate different settings for amount of coffee, temperature, pre-brewing and portion size to them later (see "Setting the portion sizes"). To set a User profile, ^ touch the sensor beside "Settings". Settings ß System lock ß Water hardness ß User profile ^ Touch the sensor beside "User profile". A tick will appear beside the user profile which is currently set. The Standard profile is allocated with standard settings. 44 Settings: Customising your machine Create To create a new User profile, ^ Touch the sensor beside "Set". ^ Touch the middle sensor on the right or left of the display until the first letter is highlighted. Then touch the sensor beside "Select character". ^ Repeat this step until the name you want for the new User profile appears in the display. To delete a letter or number, ^ touch the sensor beside "Delete character". [. . . ] WARNING: THIS APPLIANCE MUST BE EARTHED 77 Electrical connection U. K. , ZA, IRL Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted). Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier. 78 Installation Building-in and combination options The coffee machine is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE CVA 4080

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE CVA 4080 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag