User manual MIELE DG 4060

[. . . ] Operating and Installation instructions Steam oven DG 4050 DG 4060 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. GHirZ M. -Nr. 06 159 580 Contents Guide to the appliance . 18 Cleaning and heating up for the first time . 31 Changing the settings during operation . [. . . ] ^ Select and confirm "Solo". 10 : 15 Time X / SOLO $ / SOLO will appear in the display. This programme will now start when the appliance is switched on. To deactivate the Solo Programme ^ Select and confirm $ / SOLO. ^ Select and confirm "Off". 41 Changing settings Some of the standard steam oven settings (factory default settings) have an alternative which you can select if required. You can alter several settings one after the other. Proceed as follows: ^ Switch on the steam oven. ^ Select and confirm the Settings menu. SETTINGS F Back A LANGUAGE F. H ^ Select and confirm the Setting you wish to alter. Currently selected settings are indicated by a tick L next to them. If you do not make a selection in the sub-menu within approx. 5 seconds, the display will revert to the Settings menu. Language J You can set the display to show the language of your choice. You do this via the Languages J sub-menu. SETTINGS F LANGUAGE F Back A #estina dansk deutsch (A) H ^ Select and confirm the language you want. The language you have selected will appear in the display. If you have selected the wrong language by mistake you can follow the flag symbol J to get yourself back to the LANGUAGE sub-menu. 42 Changing settings Clock You can select either a 24 hour or 12 hour clock. Select and confirm the one you want. Main menu The four cooking functions listed in the left-hand side of the display can be changed to show ones that you use frequently or to show your user defined programmes. SETTINGS F MAIN MENU 1. COOK MEAT V ^ Select and confirm the one you want to change. SETTINGS F MAIN MENU Replace by Back A FUNCTION . . . USER PROGRAMMES . . . ^ Then select a new cooking function or one or your own programmes and confirm it. Start Depending on the setting, the cooking programme will start automatically about 20 seconds after the last entry was made. Alternatively you can start it manually. SETTINGS F START Back A automatic B manual ^ Select and confirm the setting you want. If you have set it for manual start, the "Start" option will be highlighted before the beginning of the programme. To start the programme you have to press the multi-function selector. Once "Start" is confirmed, "Stop" will appear in the display. You can interrupt the programme by selecting and confirming "Stop". 43 Changing settings Keeping warm The steam oven is set at the factory so that if it is not switched off at the end of a cooking programme, it will maintain a temperature of 70 °C for a maximum of 15 minutes to keep food warm. [. . . ] This appliance is supplied for connection to a single phase 230-240 V 50 Hz supply with a 3-core cable. The wires in the mains lead are coloured in accordance with the following code: Green/yellow = earth Blue = neutral Brown = live WARNING: THIS APPLIANCE MUST BE EARTHED 75 Installation Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted). Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. [. . . ]