User manual MIELE DIMENSION PLUS G 5705 SCI

[. . . ] Operating Instructions Dishwasher G 5700 G 5705 To prevent accidents and appliance damage read these instructions before installation or use. en - US M. -Nr. 09 016 350 Contents IMPORTANT SAFETY INSTRUCTIONS. 18 Items not recommended for dishwashing . 37 Preparing your appliance for an extended vacation . [. . . ] The "Start / Stop" indicator light flashes. ^ Press the "Intensive lower basket" button. The Intensive lower basket indicator light will come on if the function is available for the program which has been selected. ^ Start the program with the "Start / Stop" button. Once set, the function will remain active for the program selected until the setting is changed. Turbo The "Turbo" function can be used to reduce the program run-times, in programs in which the option is available. In order to achieve optimum cleaning results, energy consumption rates are increased when Turbo has been selected. ^ Press the K button to turn the dishwasher on. The "Start / Stop" indicator light flashes. The Turbo indicator light will come on if the function is available for the program which has been selected. ^ Start the program with the "Start / Stop" button. Once selected, the function will remain active for all programs until the setting is changed. 39 Additional options Delay start The start time of a program can be delayed from 30 minutes to 24 hours. The delay is set in 30 minute increments. When using the "Delay Start" function, make sure that the detergent compartment is dry before adding detergent. Otherwise the detergent could stick together and not completely rinse out. The detergent could leak out of the compartment. ^ Press the K button to turn the dishwasher on. The "Start / Stop" indicator light flashes. ^ Select the desired program with the "Program" button. ^ Press the "Delay start" button. The last delay start time will show in the time display. The "Delay start" indicator light comes on. ^ Set the desired delay start time with the "Delay start" button. [. . . ] 140°F / 60°C) or cold water source. For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. ­ To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary. [. . . ]