User manual MIELE EGW 602-14

[. . . ] Improper use of the appliance can lead to personal injury and material damage. The manufacturer cannot be held responsible for damages caused by improper use of the plate warmer. This appliance complies with current safety requirements. Read all instructions before installing or using for the first time. [. . . ] Use only dry, heat resistant pot holders. Moist or damp pot holders used on hot surfaces may result in steam burns. Do not substitute towels or other bulky items for pot holders. Do not use the appliance to heat the room. Due to the high temperatures radiated, objects left near the appliance could catch fire. Under no circumstances use a steam cleaner to clean this appliance. The steam could penetrate electrical components and cause a short circuit. In areas subject to infestation by cockroaches or other vermin, keep the appliance and its surroundings clean at all times. Any damage caused by pests will not be covered by the appliance warranty. Do not use outdoors. Disposal of an old appliance Before discarding an old appliance, disconnect the power cord and remove any doors to prevent hazards. 7 Using the plate warmer The plate warmer is only intended for warming dishes. Do not use the plate warmer to re-heat, cook or keep food or drinks warm. Condensation from food or drinks could cause moisture damage to the appliance. The appliance operates with a hot air system. A fan distributes hot air to heat plates quickly and evenly. A protective grill prevents any contact with the heating element and fan. The rail in the drawer separates the control panel, heating element and fan from the rest of the drawer. This prevents plates from being placed too close to the control panel and being damaged when the drawer is pushed in. The floor of the warming drawer has a non-slip mat to prevent plates and dishes sliding when the drawer is opened and closed. Controls The controls consist of the temperature selector knob and the On/Off button. These are only visible when the drawer is open. 8 Using the plate warmer Warming dishes Procedure in brief: ^ Place the dishes in the warming drawer. ^ Select the desired temperature setting. The indicator on the front of the appliance lights up to show that the appliance is on. ^ Turn the appliance off (k), before removing warmed dishes. [. . . ] ^ Plug the plate warmer into the outlet. ^ Push the appliance into the cabinetry and align it. ^ Open the plate warmer drawer and use two screws to secure the plate warmer to the side walls of the cabinetry. 16 Installing the plate warmer Adhering the insulation strips Aligning the front of the plate warmer After installing the combination appliance, it may be necessary under certain circumstances to ­ align the front of the plate warmer. ­ align the gap between the plate warmer and the combination appliance. To help you do this, there are adjusting points underneath the nuts which secure the drawer to the telescopic runners. ^ Remove the protective foil from the adhesive strips. [. . . ]