User manual MIELE G 2830

[. . . ] Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. G M. -Nr. 06 702 790 Contents Description of the appliance . 14 Before using the appliance for the first time you require: . 16 "Insufficient salt" message . [. . . ] ^ To help prevent re-soiling, a proprietary conditioning agent for stainless steel, such as Neoblank (available from the Miele UK Spare Parts Department) can also be used. Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain. Aluminium panels: ^ Clean aluminium panels with a damp cloth and a little washing up liquid. Aluminium is affected by the way that light falls on it, by the surrounding environment and by the angle you observe it from. , Stainless steel and aluminium surfaces and controls are susceptible to scratching and abrasion, and must be treated with due care. They may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. 43 Cleaning and care Checking the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. Cleaning the filters ^ Switch the dishwasher off. , The dishwasher must not be used without all the filters in place. Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use. The message Check filters will appear in the display after every 40 programme cycles (factory default setting). You can set the interval for this message to appear to between 30 and 60 programme cycles (see "Settings menu J, Check filters"). The display will change to show the programme selection menu. ^ Turn the handle anti-clockwise to release the filter combination a. ^ Lift the filter combination out of the dishwasher b. Remove any coarse particles and rinse the filter well under running water. Use a nylon brush if necessary. 44 Cleaning and care To clean the inside of the filter, the flap must be opened: ^ Press together the catches a in the direction of the arrows as shown, and open the filter b. ^ Rinse all the filters under running water. ^ Then close the flap so that the catch engages. ^ Replace the filter combination so that it lies flat in the base of the wash cabinet. ^ Then turn the handle clockwise to lock the filter combination in place. , Take care when you are fitting the filter combination that it is secured in position correctly. Otherwise coarse soil could get into the circulation system and cause a blockage. 45 Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. Remove the spray arms as follows: ^ Take out the cutlery tray (if your dishwasher is fitted with one). ^ Push the top spray arm upwards to engage the inner ratchet. ^ Remove the lower basket. ^ Pull the lower spray arm firmly upwards to remove it. ^ Push the middle spray arm upwards a to engage the ratchet. [. . . ] ^ Activate the signing on of a new appliance on the Miele|home system. ^ Repeat the signing on process on the dishwasher. 81 Settings menu J Signing off You can sign off the dishwasher if you no longer want the programme data to be transmitted. ^ Select the Sign off from confirm with the OK. Miele q home?option and Synchronising the time of day with Miele{home (the appliance must first be signed on to the Miele{home system) If your dishwasher is fitted with a Miele|home communication module and you have signed it on to the Miele|home system, the time of day in the dishwasher display will be automatically updated to match the time on the Miele|home system. [. . . ]