User manual MIELE G 2732SCI INTEG RATED, FULLSIZE DISHWASHER OPERATING AND INSTALLATION MANUAL

[. . . ] Operating Instructions Dishwasher G 2732 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 07 724 110 Contents IMPORTANT SAFETY INSTRUCTIONS. 17 Items not recommended for dishwashing . 35 Preparing your appliance for an extended vacaion . [. . . ] The display changes back to the previous menu. To switch back to "Settings J" - select Back. Gel When using gel detergent, salt and rinse aid should be added for best results. See "Filling the salt container" and "Rinse aid" for more info. The rinse aid refill message is activated. Tab If the "Tab" indicator is lit than the program sequence is adapted to suit detergents than contain rinse aid and salt (as well as other components where applicable). The rinse aid dispenser and indicator light are deactivated. Follow the instructions of the detergent manufacturer. The cleaning and drying performance of these detergent products vary. Detergent z To achieve best results the used detergent can be set on your dishwasher. The selections available are "Powder", "Gel" and "Tab". The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time could increase. Powder When using powder detergent, salt and rinse aid must be added for best results. See "Filling the salt container" and "Rinse aid" for more info. The rinse aid refill message is activated. The detergent selection is set by default to "Powder" detergent. ^ Select the desired detergent and confirm with "OK". 39 Settings J Water hardness The water hardness level set can be viewed under the submenu "Water hardness". ^ Press "OK" to return to the "Settings J" menu. To reset the water hardness see "Settings J - External water softener". °d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37-45 46-60 61-70 gr/gal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38-46 47-62 63-73 Setting in display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 45 60 70 External water softener Set the dishwasher to the hardness of your local water supply (see "Before using for the first time"). If the dishwasher is connected to an external water softener unit which is regenerated with salt, set the dishwasher to the water hardness of the external water softener. ^ Select the water hardness setting using e, confirm with OK. 40 Settings J Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. The dosage set by default to 3 ml of rinse aid per program. [. . . ] This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. [. . . ]