User manual MIELE G 542

[. . . ] 14 Programming the water hardness level . 15 Checking the programmed water hardness level. 26 Items not suitable for dishwashers: . 27 2 Contents Operating the dishwasher . [. . . ] ­ Copper, brass, tin and aluminium items may discolour or become matt. ­ Colours painted over a glaze may fade after a number of washes. ­ Clouding may occur on glasses after frequent washing. Do not wash glassware containing lead crystal in a dishwasher. We recommend: ­ When purchasing new crockery and cutlery, make sure they are dishwasher-proof. ­ There are no standard guidelines for washing glassware. ­ If delicate glassware is washed in the dishwasher ensure that only very low temperatures are used (see programme chart). Please note Silverware previously cleaned with a silver polish may still be damp or spotted at the end of a programme, where water has not run off smoothly. It may need rubbing dry with a soft cloth. Silver treated in a silver immersion dip is usually dry at the end of a programme but may discolour. Silver which has been in contact with foods containing sulphur can discolour. 20, 25, 30 ml when the door is open in a horizontal position. ^ Add the required amount of detergent and close the flap. ^ Ensure that the detergent package is properly sealed after use. Otherwise the detergent can lose its effectiveness. 29 Operating the dishwasher Programme selection Choose your programme according to the type of load and how dirty it is. In most cases this will be a Universal programme or a Universal plus programme. These programmes are ideally suited to everyday mixed loads with varying degrees of soiling. The different programmes and their uses are described in the programme chart at the end of this booklet. 30 Operating the dishwasher Switching on ^ Make sure the spray arms are not obstructed. ^ Press the "On/Off" button (13). The "Start" indicator light (15) will flash. reactivating the water softener) could be omitted. Programme sequence indicator lights (14) The "Wash/Rinse" indicator light comes on in the pre-wash, main wash, interim rinse and final rinse stages of a programme. The "Drying" indicator light comes on during the drying stage of a programme. [. . . ] ^ Please quote the model type and number of your appliance. This information is given on the data plate at the top of the door. Please note that telephone calls may be monitored and recorded to improve our service. Programme update function - PC The programme update function (PC = Programme correction) is designed to enable a service technician to update your machine's electronics in keeping with advances in technology. The indicator or check light marked "Salt PC" is used as the interface for this programming. [. . . ]