User manual MIELE G 590

[. . . ] 21 Items not suitable for dishwashers: . 24 Positioning rail (depending on model) . 31 Cutlery basket (depending on model) . 40 Starting a programme before the start time has been reached: . [. . . ] The display will also show the end time for the programme. The d indicator light will come on. }+ }Start time Finish at 12:00 13:32 12:00 OK } ^ Use +/- to set the time you want the programme to start at. If the button is kept pressed in, the time will automatically decrease or increase. The end time alters accordingly automatically. 40 Operation ^ Confirm the start time with OK. The display will change to show the programme menu. When the set time is reached, the programme selected will begin automatically. Starting a programme before the start time has been reached: You can start a programme before the set start time has been reached. ^ Select the Cancel function and confirm with OK. The d indicator light will go out. Sensor wash Programme finished 12:00 Main menu } ^ Select the Main ^ Select Start. ^ Close the door. menu option. ^ Select the programme you want. The In-operation indicator lights up. The programme starts. 41 Cleaning and care Cleaning the reflector panel Check your dishwasher regularly (approx. The message Check filters will appear in the display after every 40 programme cycles (factory default setting). You can set the interval for this message to appear to between 30 and 60 programme cycles (see "Settings menu J, Check filters"). The display will change to show the main menu. ^ Turn the handle anti-clockwise to release the filter combination a. ^ Lift the filter combination out of the dishwasher b. Remove any coarse particles and rinse the filter well under running water. Use a nylon brush if necessary. 44 Cleaning and care To clean the inside of the filter, the flap must be opened: ^ Press together the catches a in the direction of the arrows as shown, and open the filter b. ^ Rinse all the filters under running water. ^ Then close the flap so that the catch engages. ^ Replace the filter combination so that it lies flat in the base of the wash cabinet. ^ Then turn the handle clockwise to lock the filter combination in place. , Take care when you are fitting the filter combination that it is secured in position correctly. Otherwise coarse soil could get into the circulation system and cause a blockage. 45 Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. [. . . ] Please read the separate operating instructions supplied with the Miele|home system before you sign on the dishwasher. Signing on q Sign on to Mieleqhome? OK } ^ Confirm with OK that the dishwasher should be signed on to the Miele|home system. The signing on process will begin. j Signing on. Cancel } You can cancel the signing on process with Cancel. [. . . ]