User manual MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP INSTALLATION MANUAL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP. We hope that this MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP user guide will be useful to you.
Lastmanuals help download the user guide MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP.
You may also download the following manuals related to this product:
MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP OPERATING MANUAL (258 ko)
Manual abstract: user guide MIELE KM 421 MASTERCHEF ELECTRIC COOKTOPINSTALLATION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] 4 Appliance and cut-out dimensions KM 421. 7 Installation Installing the spring clips . 9 Electrical connection
2
IMPORTANT SAFETY INSTRUCTIONS
Note to the installer: Please leave these instructions with the consumer.
Installation
The minimum distances given in these instructions must be observed to ensure safe operation and to reduce the risk of fire. To prevent damage, install cabinetry and the venting hood before installing the cooktop. [. . . ] If cutlery inserts are placed in the drawer, they must be heat resistant. The cooktop must not be installed over a dishwasher, washing machine, dryer, refrigerator or freezer. The high temperatures radiated downwards from this type of cooktop could damage these appliances. Make sure that the power cord to the cooktop does not come in contact with any mechanical parts once the cooktop has been installed.
Safety distances above the appliance
As a general rule there must be a safety distance of at least 30" (760 mm), b, between the appliance and any flammable objects above it, e. g. cabinetry, venting hood or utensil rail. The minimum distance of combustible surfaces located above and to the side of the cooktop, c, is 18" (457 mm). If the manufacturer of these items recommends a different distance, follow that manufacturers recommendation.
If more than one appliance is installed beneath a venting hood, and they have different minimum safety distances to the hood, select the higher safety distance of the two.
4
Appliance and cut-out dimensions
KM 421
3 3 8" m) 85m (
5
(8m
16
"
20
33 " (85 8 mm )
m)
(5
" ) 2mm 3
15
16
(614
243 16"
mm)
b
* max. R3/16 " max. R4mm
(7 2 15
2 " . 50) n mi ( (60 23 5 8 " 0m m)
20 mm 8
3
8
)
5m16" m
(
51
)
(7 2 1 5m 5 16" m )
b
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop or the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. 3/8" drill bit.
5
Appliance and cut-out dimensions
KM 424
3 3 8" m) (85m
5
(8m
33 " (85 8 mm )
m)
16
"
20
15
16
"
(
m) 532m
30 1 16"
(763m
m)
b
* max. R3/16 " max. R4mm
(7 5m
2 " n. 50 i
m
m
2 15 )
16
"
(74
29 1
9m
2
"
(
3
20
8
m)
8 51
mm
)
2 15 (7 5m m
16
"
b
)
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop or the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. 3/8" drill bit.
6
Appliance and cut-out dimensions
KM 427
3 3 8" m) (85m
(85
(8m16" m) 3
3
8
5
"
mm
20
15
16
"
)
16 (903 " mm)
)
m (532m
35 9
* max. R3/16 " max. R4mm
21 (7 215 5m 16" m )
b
35 (88 " 9m
2 " . 50) in (m m)
20 8m 1
38
"
m)
(5
(7 2 15 5m 16" m )
b
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop or the corners, the corner radius max. [. . . ] The appliance is provided with 3 leads; L1 (black), L2 (red) and GND (green). They must be connected to a dedicated line through the use of an approved junction box. For further information, see the wiring diagram provided with the appliance. WARNING: THIS APPLIANCE MUST BE GROUNDED!
^ Note to the installer: Please leave these instructions with the consumer. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE KM 421 MASTERCHEF ELECTRIC COOKTOP will begin.
