User manual MIELE KM 5656 ELECTRIC COOKTOP OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic Cooktop KM 5656 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 06 611 220 Contents IMPORTANT SAFETY INSTRUCTIONS. 13 Turning on a variable or extended burner . 19 Setting the timer to turn off a burner automatically . [. . . ] Quick Guide: Turn on Set Touch m with - set from 99 to 00 minutes with + set from 00 to 99 minutes Touch m touch - and + simultaneously Setting the timer The timer can be set with the cooktop either turned on or off. ^ Touch the m timer control to turn the timer on. ^ Press and hold the - or + sensor until the desired time is displayed, e. g. 15 minutes. Toggle between the functions Reset back to 00 The set time counts down in minutes in the time display. The remaining time is displayed and can be changed at any time by pressing - or +. After the set time has elapsed the display shows 00 and an audible signal is heard. After a few seconds the tone will stop and the 00 will go out. ^ To end the signal touch the m timer control. 19 Timer Setting the timer to turn off a burner automatically To use this feature a power level must be selected for the desired burner. ^ Turn the desired burner on and select a power level. An indicator will light in the time display. ^ If multiple burners are turned on, press and hold the m timer sensor until the indicator of the desired burner lights, e. g. With every touch of the m timer sensor the indicators for the activated burners light up clockwise from front left to front right. The set time counts down in minutes in the time display. The remaining time is displayed and can be changed at any time by pressing - or +. The power level can also be changed at any time. When the set time has elapsed: ­ the burner will automatically turn off, ­ the burner display will show 0, ­ the timer display will show 00, and ­ an audible signal will be heard. After a few seconds the tone will stop and the 00 will go out. To toggle between the functions If the timer is already used with one function and the second function is desired: ^ Touch the m sensor. Follow the steps as previously described. ^ Press and hold the - or + sensor until the desired time is displayed, e. g. To monitor the remaining time in the function which is not displayed, touch the m sensor once. 20 Safety features Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing the settings. [. . . ] The screws are not needed for granite countertops. 37 Installation Installing the cooktop ^ Feed the power cord down through the cut-out and connect the appliance to the power supply. ^ Position the cooktop on the spring clips, a. ^ Then with a hand on each side of the cooktop press down evenly on the edges until it clicks into position. When doing so make sure that the cooktop seal sits tightly on the countertop to ensure it is sealed correctly. [. . . ]