User manual MIELE KM 5676 ELECTRIC COOKTOP OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic Cooktop KM 5676 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 06 611 230 Contents IMPORTANT SAFETY INSTRUCTIONS. 20 Setting the timer to turn off a burner automatically . 41 2 IMPORTANT SAFETY INSTRUCTIONS READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP WARNING This appliance is only intended for residential cooking. [. . . ] The time can be decreased or increased with the - or + touch control. To set the display back to 00 press and + at the same time. If multiple times are programmed, the time which elapses first is displayed. If this time is allocated to a burner, the respective indicator will flash. Setting the timer The timer can be set with the cooktop either on or off. The timer can be set from 1 to 99 minutes. To set the timer when the automatic turn off is programmed for one or more burners: Press the sensor m until all indicators of the programmed burners light steadily and the display shows 00. The display shows 00. ^ Touch the - or + sensor until the desired time is displayed, e. g. The set time counts down in minutes in the time display. The remaining time is displayed and can be changed at any time by pressing - or +. After the set time has elapsed the display shows 00 and a tone is heard. After a few seconds the tone stops and the 00 goes out. To end the tone touch the m sensor. 20 Timer Setting the timer to turn off a burner automatically To use this feature, a power setting must be selected for the desired burner. All burners can be programmed at the same time. ^ Touch the m sensor until the indicator of the desired burner lights, e. g. If multiple burners are turned on, the indicators for the activated burners light clockwise from front left to front right. ^ Touch the - or + sensor until the desired time is displayed, e. g. The remaining time is displayed and can be changed at any time by pressing - or +. When the set time has elapsed the burner will automatically turn off. The burner display shows 0, the timer display shows 00 and a tone is heard. After a few seconds the tone stops and the 00 goes out. To end the tone touch the m sensor. 21 Safety features Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing the settings. The Child Safety Lock can be activated while the cooktop is on or off. [. . . ] ^ Then with a hand on each side of the cooktop press down evenly on the edges until it clicks into position. When doing so make sure that the cooktop seal sits tightly on the countertop to ensure it is sealed correctly. The cooktop can now only be removed with a special tool. ^ Connect the cooktop to the main power supply. [. . . ]