User manual MIELE S 5980

[. . . ] Operating instructions Vacuum cleaner S 5980 To prevent accidents and machine damage, read these instructions before installation and use. UV M. -Nr. 06 806 110 2 Contents IMPORTANT SAFETY INSTRUCTIONS . 23 Purchasing new dustbags and filters . 23 Which dustbags and filters are the right ones? [. . . ] There is a danger of the threads being pulled out. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Danger of overheating and damage. Rewinding ^ Unplug the vacuum from the outlet. ^ Press the rewind switch briefly - the power cord will rewind automatically. Hold the plug so that it does not whip around when rewinding. 17 Use Turning the vacuum On and Off ^ Press the On/Off switch. On the hand piece the Standby indicator and the LED light. The vacuum can be switched to the Standby mode during pauses. ^ Press the Standby button at the handpiece. The LED at the handpiece lights and the vacuum turns off. To turn the vacuum on: ^ Press the Standby button at the hand piece. The LED goes out and the vacuum cleaner turns on to the last selected power level. The respective symbol on the hand piece lights green. ^ Press ­ to select the lowest power level. ^ Press + to select the highest power level. 18 Use Adjusting the suction Use the + and - on the handpiece to adjust the suction to suit the type of flooring. By reducing the suction power the floor brush can be pushed easier. The symbols on the controls indicate the type of use the settings are suitable for. a b c ( e f curtains, lightweight fabrics upholstery, cushions thick pile carpets, rugs and runners energy saving, daily vacuuming with low noise level lightly soiled textured carpets textured hard flooring, and for intensive cleaning of carpets ^ Press and hold the + or - button until the display shows the symbol of the desired power level. ^ Press the + control to select a higher setting. ^ Press the ­ control to select a lower setting. Each key press of the handpiece is displayed by the indicator light. 19 Use While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc. , To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static electricity. [. . . ] Clean or replace them when necessary according to these Operating Instructions. , Do not submerge the vacuum in water!If moisture gets into the appliance there is the risk of an electric shock. 31 Frequently asked questions What if the vacuum turns off automatically. A warning light , comes on to indicate overheating. The temperature limiter automatically turns the vacuum off. [. . . ]