User manual MIELE S246I

[. . . ] Operating Instructions Vacuum Cleaner S 246i - S 252i To prevent accidents and machine damage, read these instructions before installation or use. UV M. -Nr. 05 905 590 Contents Contents IMPORTANT SAFETY INSTRUCTIONS . 21 When to replace the dustbag and filters . 21 Where to purchase new dustbags and filters . [. . . ] The suction hose and the telescopic wand contain electrical wires. The plug connectors must not come in contact with water. These items may only be cleaned with a dry cloth, no moisture must touch them. This appliance is equipped with a power cord reel. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding. Do not attempt any repairs other than those listed under "Vacuum care. " Other repairs should be performed by an authorized service agent. The manufacturer can not be held responsible for any work performed by an unauthorized servicer. 5 IMPORTANT SAFETY INSTRUCTIONS Disposal of an old appliance Before discarding an old vacuum cleaner, please cut off the power cord and render the plug useless. Ensure the appliance presents no danger to children while being stored for disposal. SAVE THESE INSTRUCTIONS 6 Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposing of the dustbag and filters Genuine Miele dustbags and filters are made of environmentally friendly materials. They can be thrown out with the household trash provided the vacuum has not been used on restricted materials. 7 Guide to the vacuum 8 Guide to the vacuum 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Power cord Cord rewind switch Suction power selector * On-Off switch Release button for accessories compartment Dustbag change indicator Elbow Dust compartment lidrelease Handpiece Air inlet valve Locking button Telescopic wand * Telescopic wand release button * Fold-out wand bracket * Carrying handle Park-System Floor brush Dustbag Dust compartment filter (motor protection) Exhaust filter (SUPER air clean filter) Features marked * are only available on select models. 9 Before using the vacuum Attaching the suction hose ^ Insert the elbow into the suction socket. Removing the suction hose ^ Press the release buttons at the side of the elbow and lift the hose from the socket. Connecting the suction hose and the telescopic wand ^ Fit the handpiece of the suction hose firmly into the wand. (Ensure that the plug connectors line up). Turn the handpiece and wand in opposite directions until they lock with a click. ^ To release the hand piece from the telescopic wand press the locking button (see arrow) and pull apart. 10 Before using the vacuum Inserting the telescopic tubes (depending on model) Both sections of the telescopic wand have locating arrows. ^ When connecting the two tubes, ensure that the two arrows point to each other. Adjusting the telescopic wand (depending on model) One part of the telescopic wand is inside the other and can be adjusted to your height for comfortable vacuum cleaning. ^ Press the telescopic tube release button (see arrow) to release the tubes and adjust to the required height. Attaching the wand bracket (depending on model) ^ Attach the wand bracket onto the telescopic wand and fold it inwards. When the wand bracket is folded out the telescopic wand with suction hose and floor brush can be attached to the handle of the vacuum. 11 Before using the vacuum Attaching the floor brush ^ Insert the telescopic wand into the floor brush and turn in either direction until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. Select the middle suction setting (symbol d) for smooth and hard floors and a higher setting for carpets. [. . . ] New thread catcher pads may be purchased from your Miele vacuum dealer. Removing threads or hair wrapped around the roller 1. Remove all threads or hair and reassemble in the reverse order. 25 Vacuum care , Always turn off the vacuum and unplug it from the outlet before performing maintenance or a repair. Vacuum cleaner and accessories The external surfaces of the vacuum cleaner and of the accessories can be cleaned with a slightly damp cloth or with a cleaner suitable for plastic. , Do not use abrasive, glass or all purpose cleaners!They will damage the surface. Dust compartment The dust compartment, if necessary, can be cleaned using a dry cloth, dusting brush or a second vacuum to suck out any dust. , Do not submerge the vacuum cleaner in water!If moisture gets into the vacuum there is a risk of an electric shock. 26 Frequently asked questions What if the vacuum cleaner turns off while vacuuming? [. . . ]