User manual MIELE STB 101 TURBO MINI

[. . . ] The manufacturer cannot be held liable for damage resulting from improper or incorrect use of the appliance. Clean with a dry or slightly damp cloth when disconnected from the mains supply. If moisture gets into the appliance there is the risk of an electric shock. ~ Never touch the roller brush while it ~ Do not vacuum up items which are ~ Do not use the hand-held Turbobrush at head level. [. . . ] Any large particles inside it can then be easily removed. ^ Turn the grip so that the release button is in the middle of the guide (illustration a). ^ Press the release button (illustation b) and pull the grip out from the hand-held Turbobrush as far as possible (illustration c). ^ Lift the upper part of the casing as far as it will and remove any debris from the inside of the casing and from the roller brush. ^ Close the casing and push the grip back into position until it clicks into place over the release button. The Miele Turbobrush complies with all legal safety requirements. Improper use can cause both personal injury and property damage. Before using the appliance, read the Operating Instructions carefully. They give information on the safety, operation and care of the appliance. Keep these instructions in a safe place for future reference. Moving parts and suction can cause injury. To the vacuum cleaner, make sure the vacuum cleaner is turned off and disconnected from the electrical outlet. ~ Do not unplug vacuum by pulling on ~ Turn off all controls before unplug~ Do not immerse the hand-held Turbobrush into any liquid. Clean only with a dry cloth or slightly damp cloth to avoid any moisture getting into the vacuum cleaner, which could lead to the danger of an electric shock. ~ The hand-held Turbobrush must only be used for household purposes to vacuum and brush dry floor surfaces. ~ Do not use on people or on ~ The manufacturer cannot accept responsibility for damage or injury when this appliance is used in a manner inconsistent with its designed purpose, or if the instructions in this manual are not followed. ~ Do not touch the brush roller while it is rotating. ~ Do not use the hand-held Turbobrush at head level. Could be sucked in and become entangled in the brush roller. ~ Keep hair, loose clothing, curtains, fingers and all parts of the body away from openings and moving parts. ~ Turn off all controls before unplugging. Unplug from the outlet when not in use and before servicing. [. . . ] En - USA - Maintenance and care , Always turn off the vacuum cleaner and disconnect the plug from the electrical supply before cleaning or servicing the Turbobrush or vacuum. Removing threads and hairs wrapped around the roller: ^ Cut any threads or hairs that have become entangled on the brush roller with a pair of scissors. The cut pieces will be drawn in by the suction power of the vacuum cleaner the next time it is used. More obstinate tangles or blockages can be removed after opening the Turbobrush roller cover. [. . . ]