User manual MIELE T 494 C

[. . . ] Operating instructions for condenser tumble dryer T 494 C It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the machine. Q} M. -Nr. 05 039 522 Contents Contents Guide to the appliance. 11 How to dry correctly Hints on saving energy . . 12 12 13 13 13 14 Altering a programme . [. . . ] The indicator light for "machine iron" goes out. Press the "START" button again and keep it pressed in. The indicator light for "machine iron" will light up. Release the "START" button when the volume you want is reached. Turn the programme selector to the "Finish" position. Switch the machine off with the "I-On/0-Off" button. The change to the volume has been stored in memory. To switch the buzzer off altogether see the next page (points 1 to 0). Memory The additional options selected previously for specific programmes are stored in the machine's memory. The memory programmable function can be used to switch the memory function on or off. The machine is delivered with the memory function activated. Anti-crease Once a programme has ended, the drum will turn at regular intervals to prevent the laundry from settling into creases and folds. This programmable function can be used to switch the memory function on or off. The machine is delivered with the "Anti-crease" function activated. 18 Programmable functions Activating and storing in the memory The programmable functions are activated using the additional option buttons in special combinations with the programme selector to introduce extra features not marked up on the control panel. 7 If the "Machine iron" indicator light comes on, then the chosen function has been activated. 8 Each programmable function can be switched on or off by pressing the "START" button: "Machine iron" indicator light - on = Programmable function activated - off = Programmable function de-activated. 1 Switch the machine off and shut the door. Turn the programme selector to "Finish". 2 Press the "Short" and "Low temperature" buttons in. Hold them there and . . . 9 If you wish to activate a further programmable function, repeat steps 6 to 8. If not: 0 To store in the memory:Turn the programme selector to "Finish" and switch the machine off by pressing the "I-On/0-Off" button. To de-select a programmable function Carry out steps 1 to 0. To check whether a programmable function is activated: Carry out steps 1 to 7. switch the machine on by pressing the "I-On / 0-Off" button. 4 Release all the buttons. 5 The "Drying" and "Cool air" indicator lights will flash. 6 Turn the programme selector to one of the following positions: ­ COTTONS / Extra dry for the function "Correcting the drying level" ­ COTTONS / Normal + for the function "Buzzer" ­ COTTONS / Normal for the "Memory function" ­ COTTONS / Hand iron r for the function "Anti-crease" 19 Cleaning and care Cleaning and care Cleaning the fluff filters The fluff which is created by the drying process is collected in the fluff filters in the door and door opening. Clean the filters after every programme to reduce drying time and save energy. These filters should only be removed for cleaning with water. [. . . ] Push the adapter sleeve (3) into the hose. Screw the drain hose to the drain outlet with the knurled nut connector. Tighten the hose clip up close to the nut. 31 Electrical connection Electrical connection Electrical connection U. K. All electrical work should be carried out only by a suitably competent person, in strict accordance with national and local safety regulations. The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply. [. . . ]