User manual MIELE T382C

[. . . ] Rather than just throwing these materials away, please ensure they are offered for recycling. It should be unplugged or disconnected from the mains electricity supply by a competent person. The plug must be rendered useless and the cable cut off directly behind it to prevent misuse. See the "Warning and Safety" section of this booklet for further details. Energy saving tips To avoid unnecessarily long drying times and high consumption of energy: ­ Make sure that your laundry is thoroughly spun before drying. [. . . ] Extra option Anti-crease Notes Extra option Anti-crease * Weight of dry laundry 23 Programme chart Hygiene programmes In the Hygiene programmes the temperature is held constant for a longer period of time to deactivate micro-organisms, e. g. germs or house dustmites and also reduce the number of allergens in the laundry. These programmes should not be interrupted as this would prevent the micro-organisms from being deactivated. Extra option Fabric type Anti-crease Max. load: 6 kg* Cottons and linen fabrics, which will be in direct contact with the skin, e. g. underwear, nappies, towelling, bed linen, pillow and mattress covers. Only for drying fabrics which can withstand higher temperatures and which have the q symbol on the care label. load: 3 kg* Minimum iron items made of synthetic or blended fabrics, e. g. Only for drying fabrics which can withstand higher temperatures and which have the q symbol on the care label. Max load: depending on fabric type Cottons hygiene - Normal (drying level) Note Minimum iron hygiene - Normal (drying level) Fabric type Note Timed drying hygiene Fabric type * ­ 6 kg* of items made of cotton or linen fabric. ­ 3 kg* of minimum iron items made of synthetic or blended fabric. It could lead to health problems for people and animals. Condensed water can be put to household use (e. g. To ensure that any residual particles of fluff in the condensed water are removed before use, pass it through a fine sieve or paper filter first. ^ Holding the container firmly in both hands, as shown, pull it out slightly towards the right-hand side. ^ Hold the container in a horizontal position when carrying it. 26 Cleaning and care Cleaning the fluff filters The fluff which is created by the drying process is collected by the fluff filters in the door and the door opening. Clean the filters after each drying programme*. Cleaning them whilst dry Tip: You can also use a vacuum cleaner to remove the fluff. ^ Remove any fluff from the hollow part of the door opening. You could also use a cleaning brush which is available as an optional extra from your Miele dealer or the Miele Spare Parts Department, or use a vacuum cleaner. ^ Also clean the door seal (2) with a damp cloth. ^ Once clean, push the filter back into the door holder until it clicks into position. Ensure it is facing the correct way. ^ Open the door and pull the fluff filter (1) out of the door as illustrated. [. . . ] To activate the lock code Lock code Activate Continue OK ^ Press the right hand Menu button under OK. ^ The display will now request that a lock code is entered. The lock code is 250 and cannot be altered. To enter the lock code Lock code 0__ OK ^ Enter the first number with the left hand Menu button under -. [. . . ]