User manual MIELE T650C

[. . . ] Operating instructions for condenser tumble dryer T 650 C It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the machine. 11 How to dry correctly Hints on saving energy . Com manuals search engine Contents Cleaning and care Cleaning the fluff filters. Com manuals search engine Guide to the appliance Guide to the appliance General view 1 2 3 4 5 6 4 Supply cable for electrical connection Condensed water container Door Control panel Drain hose for condensed water (if fitted) Four height-adjustable screw feet Downloaded from www. [. . . ] Programmable function “Correcting the drying level” The Sensitive System aims to dry using as little energy as possible. However, if you require the washing to be drier, it is possible to reduce the final moisture level on all programmes. Programmable function “Memory” The additional options selected previously for specific programmes are stored in the machine’s memory. The memory programmable function can be used to switch the memory on or off. The machine is delivered with the memory function activated. Com manuals search engine Programmable functions Activating and storing in the memory The programmable functions are activated using the additional option buttons in special combinations with the programme selector to intoduce extra features not marked up on the control panel. 7 If the “Machine iron” indicator light comes on, then the chosen function has been activated. 8 Each programmable function can be switched on or off by pressing the “START” button: “Machine iron” indicator light - on = Programmable function activated - off = Programmable function de-activated. 1 Switch the machine off and shut the door. Turn the programme selector to the “Finish” position. 2 Press the “Low temperature” and “Buzzer” buttons at the same time. 9 If you wish to activate a further programmable function, repeat steps 6 to 8. If not: 0 To store in the memory: Turn the programme selector to “Finish” and switch the machine off by pressing the “I-On/0-Off” button. to de-select a programmable function Carry out steps 1 to 0 . To check whether a programmable function is activated: Carry out steps 1 to 7. 6 Turn the programme selector to one of the following positions: – COTTONS, extra dry for programmable function “Correcting the drying level” – COTTONS, normal for programmable function “Memory” 21 Downloaded from www. Com manuals search engine Cleaning and care Cleaning and care Cleaning the fluff filters The fluff which is created by the drying process is collected in the fluff filters in the door and door opening. Clean the filters after every programme to reduce drying time and save energy. These filters should only be removed for cleaning with water. Dry the filters well after rinsing and put back in place. Cleaning the tumble dryer Open the door. Grip the filter by the recessed handle and pull upwards to remove. [. . . ] Please ensure these match the household mains supply. Connection should be made via a fused plug and suitable switched socket which is easily accessible after installation. For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA. Important The wires in the mains lead are coloured in accordance with the following code: Green/yellow Blue Brown = earth = neutral = live The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black. [. . . ]