User manual MIELE T8002

[. . . ] Vented Dryer T 8002 T 8003 T 8005 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 06 879 010 Contents IMPORTANT SAFETY INSTRUCTIONS. Turn on the dryer and load the laundry . 12 Adding or removing laundry during a program . [. . . ] Possible fault The child lock is activated. See "Child Lock. " What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?The dryer will not operate if the drum is empty. Single items should be dried with "Sturdy" or a timed program. For dry items use the "Fluff" program. What if the "Filter/Vent" fault indicator is lit?Possible fault The lint filter is clogged. The exhaust hose or the connection is clogged with lint. The air supply in the room is insufficient. 18 Solution Clean the lint filters. Remove lint and check the exhaust system for blockages. Open a window or door to increase airflow. Frequently asked questions What if the "Filter/Vent" indicator lights after cleaning the exhaust system?Possible fault The dryer is not operating efficiently because the duct hose is too long. Solution Check the exhaust length and diameter (see "How to calculate the effective duct length"). A long exhaust hose will increase program times and energy consumption. If the exhaust hose cannot be shortened, the indicator can be turned off by a service technician. What if the program runs too long or stops?Possible fault The airflow is insufficient in the area of the dryer. Solution Open a window or door to increase airflow. Clean the lint filters (see "Dryer care"). The laundry was not spun sufficiently in Select a higher spin speed in the wash the washer. Metal zippers interfere with the dryer's moisture sensors. Select a timed program to avoid over drying. An airflow gap of 3/8" (10 mm) must be This gap must not be blocked by a provided between the machine and the toe-kick or thick piled carpets for floor. Possible fault The load contained too many dissimilar items (size and fabric. ) What if water has collected around the drum opening?Possible fault This is condensed moisture from the laundry. 19 After sales service Repairs In the event of a fault which you cannot fix yourself, please contact Miele's Technical Service Dept. When contacting Technical Service, please quote the model and serial number of your appliance. [. . . ] Effective duct lengths over 66 ft (20 m) require a larger duct diameter. Longer ducts may lead to slight decreases in dryer efficiency if the necessary duct diameter is not employed. 33 Installation Tips about the duct work ­ Check with your local building code to determine the maximum allowable duct length. ­ Only use rigid or flexible metal duct for exhausting. Non-metallic flexible hose should not be used, it is a potential fire hazard. [. . . ]