User manual MIELE T8019CI

[. . . ] Operating and Installation Instructions Condenser Dryer T 8019 C To prevent accidents and machine damage read these instructions before installation or use. en - US, CA M. -Nr. 06 881 341 Contents IMPORTANT SAFETY INSTRUCTIONS. Turn on the dryer and load the laundry . 12 Adding or removing laundry during a program . [. . . ] Continue rinsing until the condenser until clean. ^ Check the condenser gasket for soiling. ^ Place the condenser lengthwise on a towel to air dry. 19 Dryer Care Changing the light bulb ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate. ^ Flip up the light bulb cover and press it firmly until it clicks into place. , To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Open the door. The bulb cover is located along the upper rim of the drum opening. , Make sure the bulb cover is securely closed to prevent a short circuit or penetrating moisture. ^ Restore power. ^ Slide a screwdriver with a wide head underneath the side edge of the bulb cover and twist (see illustration). ^ Flip down the bulb cover. 20 Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the dryer. Quick Guide 1. Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. Make sure that there is enough space in the drum for clothes to tumble freely. ^ Press the e or - button until the desired program indicator lights. Select a drying option (if needed) To prevent fabric damage, check that laundry will not be caught in the closed door. ^ Close the door with a firm swing - do not push it shut. ^ A drying option can be selected or deselected with each press of the button. Quick Guide 4. Start the program ^ Press the "Start/Stop" button. At the end of a program The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Press the selection button until the desired indicator illuminates. ^ Press the "On/Off" button to turn off the dryer. Quick Guide Program Normal Extra Dry When to use Available drying options Turbo, Gentle, Anti-crease For laundry to be folded and shelved immediately, e. g. For items to be left damp for ironing. Note The "Extra Dry" program should not be selected for jersey materials. Items may shrink. More Dry Normal Less Dry Hand Iron Rotary Iron If items are still damp, dry again using "More Dry". If fabrics are too damp, dry again using "Less Dry". For items to be ironed with a rotary iron. For items that do not require ironing, e. g. For items which require ironing. To prevent moisture loss, roll up the laundry until ready to iron. Wrinkle-free Available drying options Turbo, Gentle, Anti-crease More Dry Normal Less Dry Reduce load size for fabrics that wrinkle easily. Special Programs Available drying options: Anti-crease only available in Fluff, Sturdy Woolens Delicate items which allow machine drying. Program for reducing creasing in delicate items. [. . . ] ^ Push the top of the decor frame onto the frame from the front and fix it with the four screws. ^ Unscrew the 4 screws at the top of the decor frame and pull it forward. ^ Loose the screws at the other sides of the decor frame but do not take them out. 33 Installation Shortening the door panel The door panel can be shortened to match the height of the adjacent cabinetry. Installation ^ Open the door. The measure X equals the space from the bottom of the washer door to the bottom of the adjacent cabinet. Cut the bottom of the door panel with a jigsaw according to X. [. . . ]