User manual MIELE W1065

[. . . ] 27 2 Contents Cleaning and care . 27 Cleaning the exterior and control panel. 29 Cleaning the drain pump and lint trap . 36 Opening the drum door during a power failure . [. . . ] ^ Use only as directed by the manufacturer. , Do not use dye removers in this washer! 22 Using the washer 8. Select Delay Start (if desired) Delay start allows you to delay the start of a program from 30 minutes up to a maximum of 24 hours. Adjust The selected Delay Start time cannot be changed. Cancel ^ Press the "Cancel" button. 9. Start the program ^ Press the "Delay" button. Start in: 0:30 h yz Warm High spin ^ Press the flashing "Start" button. If the delay start is set, the remaining times elapses in the display. Once the delayed start time has elapsed or immediately after the program start, the approximate program running time is displayed. The overall program time may be shortened or lengthend. Additionaly the sequence cycle is displayed. The washer shows the current program step. The drum light turns off once the program starts. ^ With every touch of the "Delay" button, the start is delayed longer. ­ the program has reached the "Final Spin". ­ The Child Lock function is activated. If you attempt to open the door while the washer is in one of the above statuses "Machine locked" will appear in the display. X Machine locked 26 Quick guide Remove this guide for easy reference Please read all instructions, especially the "Important Safetey Instructions", before using the washer. Quick guide 1. Selecting a program ^ Empty all pockets. Turn on the washer ^ Press the program button of the desired program. The indicator of the selected program lights. Selecting a temperature The preselected temperature and/or spin speed can be adjusted if the program allows so. ^ Press the "On/Off" button. The washer is turned on and the program indicators light. Load the laundry Duration: 1:02 h y Warm High spin By pressing the left button the temperature will be adjusted. Pressing the right button modifies the spin speed. ^ Press the "Door" button and load the laundry. [. . . ] Do not remove these filters except for cleaning. Tips for a hot water connection The hot water temperature from the hot water valve must not exceed 140°F (60°C); the ideal temperature is 130°F (55°C). If there is no water pressure at the hot water inlet, the unit will automatically switch to cold water after several minutes. 47 Plumbing Drainage The 5 foot (1. 5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e. g. [. . . ]