User manual MIELE W3033

[. . . ] Operating and Installation Instructions Washer W 3033 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 06 911 001 Contents IMPORTANT SAFETY INSTRUCTIONS. Select a temperature and/or spin speed . 25 Preparing your appliance for an extended vacation . [. . . ] ^ Activate the Child Lock so children or animals do not find their way into the drum. 24 Using the washer Canceling a program A program can be canceled any time after the program start. Interrupting a program ^ Turn the washer off. To continue: ^ Turn the washer on again. Changing a program A program change is not possible once the program has started. The program must be canceled. Adjusting the temperature The temperature can be changed up to 6 minutes after the program start. ^ Press and hold the "Cancel" button until the display shows: Cancel Adjusting the spin speed The spin speed can be adjusted anytime until the beginning of the final spin. Adjusting the options The wash water will be drained away. To add or remove laundry ^ Open the drum door. To select another program The display requests the program selection. The options "Extended" or "Sensitive" can be selected or deselected up to 6 minutes after the program start. The "Buzzer" option can be selected or deselected at any time. 25 Using the washer Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc. The drum door cannot be opened if: ­ the water temperature is greater than 130°F (55°C). ­ the program has reached the "Final Spin". ­ The Child Lock function is activated. If you attempt to open the door while the washer is in one of the above statuses "Machine locked" will appear in the display. Adding/removing laundry during a wash program ^ Press and hold the door button until the door opens. Note: Once the program has started the washer can not make adjustments of the load size. X Machine locked 26 Quick guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the washer. Quick guide 1. Selecting a program ^ Empty all pockets. Turn on the washer ^ Press the program button of the desired program. The indicator of the selected program lights. Selecting a temperature The preselected temperature and/or spin speed can be adjusted if the program allows so. ^ Press the "On/Off" button. The washer is turned on and the program indicators light. Load the laundry Duration: MG G P G G GM Warm 1:02 h MG G G G P GM High spin By pressing the left button the temperature will be adjusted. Pressing the right button modifies the spin speed. [. . . ] To a floor drain: The machine is equipped with an air gap / anti-siphoning system so that no minimum drain height is required. ^ The machine drains using a pump with a maximum delivery height of 4 ft (1. 2 m). ^ Make sure there are no kinks in the drain hose. If necessary, the drain hose may be extended to run a maximum of 16 ft (4. 9 m), as long as the 4 ft (1. 2 m) height is not exceeded. [. . . ]