User manual MINOURA LEVEL-170

[. . . ] LEVEL-170 Instruction Manual Read this instruction manual carefully before use. Thank you for purchasing the Minoura LEVEL170 race stand. [. . . ] Holding the bar in one hand, push the right or left leg of the stand out with your foot until the jaws come in contact with the bar. Once the jaws have come in contact with the bar, use your hand to push the LINK PLATE down until the jaws and LINK PLATE lock securely into place. Repeat the procedure for the other side of the stand. Clamp Jaw Bar Connecting Plate Leg Ü" Link Plate (Fig. Before placing any bicycle on the stand, be sure that all legs are touching the ground. 3. To break the stand down, simply use your knee to kick up on the underside of the LINK PLATE until the jaws let go of the bar. Repeat on the other side. Using Your Own Bar If you use a 22. 2 mm bar, you must move the bolt from its factory D position, over one notch to the C position (see diagram below). NOTE: ONLY COMBINATION A-C WILL WORK IF YOU USE A 22. 2 mm BAR. [. . . ] phone 1-510-739-1395 fax 1-510-790-1108 Email: MinouraUSA@ATTglobal. net MADE IN JAPAN Copyright © Minoura Co. , Ltd. [. . . ]