Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MINOURA NW-300. We hope that this MINOURA NW-300 user guide will be useful to you.
Lastmanuals help download the user guide MINOURA NW-300.
Detailed instructions for use are in the User's Guide.
[. . . ] NW-300 is the spoke nipple wrench for twisting nipples on 14G/15G spokes. Please read this instructions manual carefully before use to understand how you will do on your bicycle wheel.
Knob Bolt Gauge Plate Ratch Rim Guide 15G 15G 14G
<FCG-310>
Frame
14G
IMPORTANT NOTES
<NW-300>
Positioning Lib
!!
FCG-310 is the measuring gauge for bicycle wheel only. [. . . ] Turn the Gauge Plate counter-clockwise to locate the hole at the down end side. Put the Gauge Plate on the flat groove on the outside of the Ratch. Tighten the Knob Bolt, but you don't need to tighten it so firmly at this moment. If the Gauge Plate doesn't fit to the flat groove on the Ratch correctly, you won't be able to measure properly. And also the Gauge Plate will have to be bent. Please be sure that the Gauge Plate cannot be replaced. Attach the FCG-310 to the wheel as shown in Fig. While keeping both Rim Guides touching the rim, loosen the Knob Bolt to adjust the Gauge Plate position, then tighten the Knob Bolt when the Gauge Plate end touches the hub.
5. A)
At this moment, make sure the following points; · Both Rim Guides touch the rim. · The wheel axle is running through the hole on the Gauge Plate, and the Gauge Plate touches the hub.
6.
Flip over the wheel and attach the FCG-310 onto the opposite side of the wheel. Do not change the Gauge Plate position yet. At this time, if all three points (both Rim Guides and the tip of the Gauge Plate) touch each appropriate position at once on both side of the wheel (see Fig. B), your wheel is properly assembled and adjusted. But if either one of the Rim Guides or the Gauge Plate doesn't touch the appropriate position (see Fig. C), your wheel needs to be adjusted further.
Properly Adjusted
(Fig. C) If the Rim Guide doesn't touch the rim, the wheel has been moved toward opposite side. [. . . ] Use another nipple wrench.
Insert the wrench of the NW-300 to the nipple fully to the bottom. Do not use any incorrect (wider) size wrench. You must stop tightening after turning 1/2 rotation at once at widest. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MINOURA NW-300
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MINOURA NW-300 will begin.
