User manual MINOURA P-600AL CLOSET-CYCLIST 2

[. . . ] P-600AL "Closet Cyclist 2" instructions manual Thank you for purchasing Minoura "P-600AL Closet Cyclist 2" bicycle display stand. [. . . ] B) Pillar Base Plate Leg Base Plate Right Side Front Leg Height Adjuster Rear Leg 3 Required Tools for Assembling 1 x 5mm Hex Wrench 1 x 13mm Open Wrench Put the M6x40 type-A bolt with Spring and Flat washer into the backside hole and tighten firmly. After that, tighten the front side bolt firmly too. D Main Pillar Bolt Type Variation Type-A: plain type bolt 4 Insert the Main Pillar onto the Pillar Base Plate. Apply the Backside Leg on the back of the Main Pillar, then tighten with the supplied two M6x18 type-B bolts temporarily Type-B: with Spring Washer M6x18 Bolt Backside Leg MADE IN JAPAN (not firmly). D) 5 Install the Reinforcement Bars to the Main Pillar with supplied M6x70 type-A bolt, Plastic washer, M6 flat washer and M6 Nylon nut. Then tighten the M6x18 bolts on the Backside Leg firmly. E) M6x70 Bolt Plastic Washer Fig. E Reinforcement Bar 6 Once disassemble the Stainless Band Clip. Wind the Stainless Band around the Main Pillar, insert the tip between the Rectangle Nut and the box part of the band, and apply the Plastic Bracket. [. . . ] Fax 1-510-538-5899 / Email support@MinouraUSA. com [. . . ]