User manual MINOX DC 2122

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Open the lens cover, turn the mode dial to the mode, and power on the camera. Move the focus switch located on the front side of the camera to the position. Press the shutter button. 18 Using the digital zoom Using digital zoom, images appear closer. Whereas digital zoom is a compelling feature, the more an image is enlarged (zoomed), the more pixilated (grainier) the image will appear. The digital zoom function is only available when you set the LCD monitor and the digital zoom to ON. To enable the digital zoom, refer to DIGITAL ZOOM in Record menu. Open the lens cover, turn the mode dial to the mode, and power on the camera. Turn the LCD monitor on by pressing the button. Press the OK button to activate 2X digital zoom function. To cancel the digital zoom function, press the OK button. Press the shutter button to capture a "zoomed" image. 2X E NOTE · You can only set the digital zoom at the resolution of 1600x1200 pixels; digital zoom is not available at the resolution of 800x600 pixels. When you play back a "digitally zoomed" image, the image size is 800x600 pixels. · The more the image is enlarged, the more pixilated (grainier) the image. · Digital zoom cannot be used in the movie mode. 19 Using the self-timer The self-timer duration is 10 seconds. After the activation of the self-timer by pressing the shutter button, the self-timer lamp starts blinking slowly for 7 seconds and then blinking faster for the rest of 3 seconds. This allows you to get into the scene when taking group images. E 1. Secure the camera to a tripod or place it on a stable surface. Open the lens cover, turn mode dial to the mode, and power on the camera. The icon appears on the LCD monitor and status LCD. After ten seconds, the camera takes an image. To cancel self-timer photography at any time, press the shutter button to disrupt the sequence. NOTE · After one shot is taken, the self-timer mode is turned to off. 20 Using the macro mode Use the macro mode to shoot a close-up of the subject, such as flowers or insects. The effective range is between 30cm and 80cm. [. . . ] After removing the batteries from the camera, the date and time will return to the default setting. If this happens, reset the date and time when using the camera. E [YEAR], [MONTH], [DAY], [TIME] LANGUAGE This option allows you to select the language for the menus and the text displayed on the LCD monitor. Press the OK button to enter the LANGUAGE sub-menu. And then select the preferred language using the / button and press the OK button. [. . . ]