User manual MINOX DC 1044

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The recording time depends on the storage size and the subject of the image to be recorded. The zoom function cannot be used during video recording. When recording a video clip, the flash and "10+2 sec. " self-timer function cannot be used. If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in the currently selected quality, the video recording will stop. In this case, select a video quality lower than the current one. Playing Back Video Clips You can play back recorded video clips on the camera. Select the desired video clip with the / buttons. A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback, press the button. This stops playback and returns to the start of the video clip. To pause video playback, press the SET button. To cancel pause, press the SET button again. Video clips cannot be displayed rotated or enlarged. Windows Media Player or QuickTime Player is recommended to play back the video clip on your computer. QuickTime Player is a free media player available at www. apple. com; and compatible with Mac and Windows computers. For more information about the operation of the media player, refer to its respective help documentation. EN-21 PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. The images can be displayed in forward or reverse sequence with the / buttons. To view the previous image, press the button. To view the next image, press the button. Slide the zoom lever to =/X side enlarges thei mage. To return to normal magnification, slide the zoom lever to >/Y side. An [B] icon is displayed with the video data. An [a] icon is displayed with images which have an audio memo recorded. EN-22 Playback Display This function allows you to search quickly for the image that you want and playback images on the LCD monitor sequentially. Press the button to display the next 10th image. If the 1st image taken is displayed, press the button to playback the 11th image taken. Press the button again to playback the 21th image taken and so forth. [. . . ] For Windows 2000/XP/Vista users, please make sure to install and use the software in "Administrator" mode. The software is not supported by Mac. EN-37 SPECIFICATIONS Item Image sensor Description 1/2. 33" CCD sensor (10. 0 megapixels) <Still image> 10M: 3648 x 2736, 6M: 2816 x 2112, 4M: 2272 x 1704, 2M: 1600 x 1200, VGA: 640 x 480 <Video clip> VGA: 640 x 480 (30 fps), QVGA: 320 x 240 (30 fps) 3. 0" full color TFT LCD (230K pixels) 32MB internal memory (approx. 28MB available for image storage) Supports SD/SDHC memory card (up to 8GB) (optional) DCF, JPEG (EXIF 2. 2), DPOF, Motion-JPEG (AVI) 3x optical zoom lens Aperture range: 2. 9(W) - 5. 4(T) Focal length: 6. 4mm - 19. 2mm (equivalent to 35mm - 105mm on a 35mm camera) Standard 0. 4m to infinity Macro Wide: 0. 05m to infinity Tele: 0. 4m to infinity 1 - 1/2000 sec. 4x (Capture mode) 4x (Playback mode) 0. 5m - 2. 4m (Wide) 0. 5m - 2. 1m (Tele) AV OUT USB 2. 0 compliant (2 in 1 terminal) Rechargeable Lithium-ion battery (3. 7V) Approx. [. . . ]