User manual MINOX DC 5011

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Compose your subject within the focus frame. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 Night Mode This mode allows you to take photographs of people against a dusk or night-time background. Rotate the mode dial to mode and turn your camera on by pressing the power (ON/OFF) button. Compose your subject within the focus frame. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 EN-32 ADVANCED SHOOTING Burst This mode is used for continuous shooting. Pictures are taken continuously while the shutter release button is pressed. Rotate the mode dial to P , , , or and turn your camera on by pressing the power (ON/OFF) button. Press the MENU button, then use to select the [FUNCTION] menu. Use to select [CAPTURE MODE], then press the button. Use or to select [BURST], then press the 5. To exit from the menu, press the MENU button. The indicator is displayed on the monitor screen. Press the shutter button halfway to lock the focus. Press the shutter button all the way to shoot. Shooting will stop when the shutter button is released. PICTURE FUNCTION AUTO 2/3 CAPTURE MODE X1 SINGLE BURST AEB 2/3 In Burst mode, the flash mode will be set to OFF automatically. EN-33 Auto Exposure Bracketing (AEB) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range. Rotate the mode dial to P , camera on by pressing the power (ON/OFF) button. Press the MENU button , then use to select the [FUNCTION] menu. Use to select [CAPTURE MODE], then press the 4. Use or to select [AEB], then press the button. To exit from the menu, press the MENU button. The indicator is displayed on the monitor screen. [. . . ] * Install the USB driver on your computer. * Turn on the camera. Flash does not fire. * NO FLASH is selected in flash mode. * The camera is in BURST/AEB/ mode. Continuous shooting is not possible. Cannot transfer files over a USB connection. * The capacity of the built-in memory or SD memory card is full. [. . . ]