User manual MINOX DIGITAL CLASSIC CAMERA BLITZ

[. . . ] When this indicator is turn off, the charging is completed. Switching the camera on To switch your camera on, press and hold the mode button. [. . . ] To switch your camera off, press the mode button until the Setup Screen shows up. Press the down button to highlighte Power Off and then press the shutter button to switch your camera off. Battery lock 3 Setup Camera Power Off Format Auto Off Buzzer Your camera will automatically turn itself off in 60 seconds if unused to conserve battery power. Playback mode Review your photos or movies on the display screen Press the mode button repeatedly until you reach the playback mode ( ). Use the up or down buttons to scroll through the stored images. To review a movie clip, press the shutter button to start viewing, to stop viewing before the end of the clip press the shutter button again. Image quality Taking your fi rst picture Frame your subject When the camera is turn on, the camera is in Take Photo mode, will show on the display screen, if it is not visible, press mode button until it is. Frame the subject you want to capture in the display screen on the back of your camera or through the viewfinder. Low (*) ­ 2608 x 1956 px up to 144 images Normal (**) ­ 2608 x 1956 px up to 110 images High (***) ­ 2608 x 1956 px up to 73 images Press the mode button until you enter the Set-up menu. Select Yes and press the shutter button again. The selection is deleted from the camera memory. Downloading your images to your computer Note: You do not need to install camera drivers for Windows versions 2000/ME/XP and Mac OS 9. x or OS X. Your camera does not support version older than those stated above. Note: When your camera is connected, your computer provides power through the USB cable, saving your camera`s battery power. Delete all your images at once In Playback mode ( ), press shutter button to view the playback menu, scroll to Delete All and press the shutter button. Select Yes and press the shutter button again. All saved images will be deleted from the memory. Connecting your camera to the computer To connect your camera to your computer, the camera must always be turned on first. Then connect the camera to your computer using the provided USB cable (the smaller head connect to the camera side and the larger head side connect to the computer side). 6 Distance Setting The depth of fi eld of the camera extends from 2 m to infinity, i. e. [. . . ] Then connect the camera to your computer using the provided USB cable (the smaller head connect to the camera side and the larger head side connect to the computer side). 6 Distance Setting The depth of fi eld of the camera extends from 2 m to infinity, i. e. focusing is not required within this range. [. . . ]