User manual MIO MIOMAP 2.0

[. . . ] Copyright The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of Mio Technology Europe, nor transmitted in any form either electronically or mechanically, including photocopying and recording. Indicating several destinations (Itinerary with stages). 1 Adding a stage point during navigation. [. . . ] When the route is calculated, the total distance and the estimated duration from the first to the last route point are displayed below the route points list of the ITINERARY PLANNING screen. Furthermore, the distance and the estimated duration of each stage will be indicated with the selected route point entry. You may calculate the linear distance between the individual route points and for the entire route. The system assumes then the first route point to be the start point of the route. Note: When you start navigation, the system identifies your current position and makes it the start point. The first indicated route point is then the first stage point. Tap on this button in order to calculate the linear distance between the individual route points and for the entire route. A message window informs you on the progress of calculation. When you´ve carried out the calculation, on the ITINERARY screen under the route point list the total of all linear distances between the individual route points is displayed. The linear distance from the preceding route point is also given for the selected route points. When navigating in linear distance mode you therefore cannot receive any driving instructions. Tap the Show on map button to display the entire itinerary on the map. For information on working with maps, please refer to "Working with the map", page 75. You may execute a simulated navigation along the itinerary when the route has been calculated. You cannot launch a simulation if you have selected Linear distance for Type of routing. Stopping the simulation You may quit a simulation at any moment. You have entered a destination as described in "Indicating a destination", page 34, - OR You have selected a destination from the FAVOURITES as described in "Favourites", page 49, - OR ­ You have selected one of your RECENT DESTINATIONS as described in "Recent destinations", page 51, - OR You have planned or loaded an itinerary as described in "Indicating several destinations (Itinerary with stages)", page 55. Caution: If you would like to launch navigation with driving instructions and route display, do not select the Linear distance entry in the Type of routing field!Refer to chapter "Starting navigation in linear distance mode" on page 72 (next chapter) to find out more about navigating in linear distance mode. for detailed information on setting the route options , please refer to "Routing options" , page 107. Note: The standard settings for the route options may be changed in SETTINGS ­ ROUTE OPTIONS. Your current position is indicated by a green arrow. [. . . ] Home address On the HOME ADDRESS screen, you may save your home address to quickly start navigation homewards from anywhere. Tap the Address button and enter your home address as described in "Entering an address", page 35. This function is only available in "Extended mode". for information on how to change the user mode , please refer to "Changing the user mode" , page 24. [. . . ]