User manual MIO MOOV SPIRIT 500 HF TRAFFIC QUICK GUIDE

[. . . ] Moov/Navman Spirit Series Hardware Manual Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. [. . . ] The FM screen will display with the saved frequency. You can only save four FM frequencies on your Mio. Tap Apply Directly to apply current frequency directly. Apply Directly option allows you to set the audio output channel automatically to FM (current frequency). 7. Tap and select the frequency you want to use. To delete a saved frequency, you must set a new frequency and replace the frequency that you no longer require. 53 How do I receive current traffic information via TMC? Traffic information is not available on all models and is only available in selected countries. Your Mio can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location. How does my Mio receive traffic information? Depending on your model, you may receive current traffic information on your Mio using the built-in TMC receiver or via the Mio traffic accessory kit. The traffic accessory kit may be sold separately. The Traffic Message Channel (TMC) broadcasts real-time traffic and weather information via the FM Radio Data System (RDS). FM radio stations transmit TMC data on a cycle of several minutes, with hundreds of events able to be broadcast to TMC receivers. You have to pay for TMC service in some models and in some countries. Traffic status Your current traffic status is indicated by the colour of the TMC icon. To view your current traffic status, from the Main Menu, tap The following table describes the three traffic status icons: Traffic Status Description The TMC status is grey if traffic is currently inactive due to one of the following conditions: Your Mio or traffic accessory kit is connecting to the TMC service. Your Mio or traffic accessory kit cannot receive TMC data. This may be due to poor radio coverage in the local vicinity. You are in a country that is not supported by the Mio traffic accessory kit. Tap to display the Traffic Overview screen. The TMC status is orange if one of the following conditions apply: You have navigated into a country that is not supported by Mio Traffic, but there are still traffic events listed on the Event List screen. You have separated your Mio from the Mio traffic accessory kit, or the Mio traffic accessory kit is not receiving power but there are still traffic events listed on the Event List screen. Tap to display the Traffic Overview screen. The TMC status is green if your Mio or traffic accessory kit is active and receiving traffic events. Tap to display the Traffic Overview screen. Your traffic status is displayed in more detail on the Traffic System Status screen. [. . . ] Usage is at your own risk. Safety Camera POIs Mio products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Mio does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Mio does not condone speeding or any other failure to comply with your local traffic laws. [. . . ]