User manual MITSUBISHI AH350

[. . . ] Getting Started Even if you don't like reading manuals, please read this section, as well as Commonly Used Features starting on page 8, to understand how to use some of the phone's basic features and functions. In this section you will learn about: · · · · · · Battery Information Turning the Phone On and Off Placing and Receiving Calls The Telephone Display Using the Keypad Using Functions Getting Started Battery Information Please read this section first in order to understand how to prolong the life of your battery and prevent damage to your telephone. Installing and Removing the Battery Insert the top of the battery into the recess on the back of the phone. Push inward and upward from the bottom until the locking catch snaps into place. To remove the battery, make sure the power is off. [. . . ] Press RCL, then enter the 2-digit memory location for the phone number to erase. Press TALK to remove the phone number and label from memory. Press END to return to Standby without erasing this phone number. After you erase information and Erased displays, press TALK to select another location to erase, or press END to return to Standby. 19 Features Many of the features of the AH-350 provide security from unauthorized use. This section includes information on the following: · · · · · · · Security Features Timers Keypad Lock Selectable Ringing Tones Status Monitor Multiple Language Selection Automatic Answer Call in Absence Indicator Features · Security Features Security Code To access functions beginning with 6, press FCN 6, press TALK, then enter the 4-digit Security Code. If you enter a wrong code, Incorrect Security Code displays. NOTE: The Security Code is pre-programmed You cannot change the Security Code. Creating an Unlock Code 1. Press FCN 62, then enter the Security Code. To create a new Unlock Code, press TALK, enter 3 digits and press TALK again. NOTE: You can program a new Unlock Code even while the phone is locked. 20 Locking the Phone 1. If you enter a wrong Unlock Code, Invalid Code!!NOTE: You can dial 911 while the phone is locked. DO NOT use 911 as your Unlock Code. Call Restriction 1. Press FCN 61 while in Standby, then enter the 4-digit Security Code. Current Call Restriction status displays. Select from the following Call Restriction levels: No Restriction All call features are enabled. Local Only Disables long distance calls. Only 7-digit local calls and toll-free calls allowed. Recall 1-99 Disables numbers not stored in memory locations 1-99. Also prevents entry of new phone numbers into memory locations. Recall 1-9 Disables numbers not stored in memory locations 1-9. Also prevents the entry of new numbers into memory locations. [. . . ] For your phone to operate at the lowest power level, consistent with good call quality, please observe the following guidelines: · · · 40 If your phone has an extendible antenna, extend it fully. Hold the phone as you would any other telephone. DO NOT hold the antenna while the phone is in use. Antenna Care DO NOT use your phone with a damaged antenna. Use manufacturer-approved antennas, and have authorized service centers do the work. [. . . ]