User manual MITSUBISHI DX-PC FOR VIEW

[. . . ] Remote Operation Software (DX-PC For View) Table of Contents Chapter 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 In This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 DX-PC For View Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 3 Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Admin Layout: Displays only the panels that are used most frequently in the Admin screen mode. Hide Layout: Hides all panels and displays only the screen. User Defined Layout: Displays the user-defined layout. ­ Layout Setup: The user can configure the frame layout by displaying panels on the screen where they are most convenient. Set up the user-defined frame layout. Always Load Layout at DX-PC For View Startup: Select whether or not the selected frame layout loads automatically when DX-PC For View starts. Save: Enter a layout name and click the Save button to save the current frame layout as a new user-defined layout. Rename: Select the layout to change from the Layout List and click the Rename button. Delete: Select the layout to delete from the Layout List and click the Delete button. NOTE: Up to 10 user-defined layouts can be saved. 30 Remote Operation Software (DX-PC For View) Help Menu Displays DX-PC For View version information. 3. 4 Toolbar The Toolbar allows convenient access to desired functions. The controls on the toolbar perform functions as described below: Disconnect Batch Job Setup Save DX-PC For View Setup Log Print Load Setup File Save Favorite Sites Panic Recording Save Setup File Auto Sequence Play Select the desired screen layout using the layout toolbar. When changing the screen layout, the selected camera on the current screen will be located in the first cell of the new layout. When in one of the multi-view formats, clicking the or button will move to the previous or next page. Clicking (Layout Load) will apply the selected frame layout to DX-PC For View, and clicking Setup) allows you to set up the user-defined frame layout. (Layout 31 User's Manual 32 Remote Operation Software (DX-PC For View) Chapter 4 Operation 4. 1 Live Monitoring DX-PC For View provides remote monitoring functions for viewing video images in real time from either a single site or multiple sites. In addition, when events are detected at a remote site while in the live monitoring mode, DX-PC For View displays the event information on the Watch Event View panel. In order to perform live monitoring, the display option must be set to Watch Screen or Watch and Search Screen during System setup. To connect a remote site on the Watch screen, select the site or camera you want to connect to in the Remote Site, Favorite Sites or Map panel and then drag and drop it in the desired position on the screen. The icon will be displayed on each Watch screen. To disconnect the current connection, select the site or camera you want to disconnect to in the Remote Sites, Favorite Sites or Map panel or on the screen and then click the button on the toolbar or select Disconnect from the System drop-down menu. NOTE: Some DVR models will only transmit images to the DX-PC For View system while recording video. NOTE: When selecting the display option of Watch and Search Screen during System setup, the remote site can also be set to connect using the right or left mouse buttons (This is user-defined and must be set during System setup). Select Watch Screen to connect to the selected site on the Watch screen when the text menu screen appears. Screen Layout and Frame Layout DX-PC For View provides multiple screen layout options. The formats available are single-screen, quad, 1+7, 3x3, 4x4, 5x5, 1+32, 6x6, 7x7, 8x8 and full-screen. When in one of the multi-view formats, clicking the or button will move to the previous or next page. To view a specific image in the single-screen mode, move the cursor to that image and double click the left mouse button. To return to the previous screen mode from the single-screen mode, double click the left mouse button in the monitoring window. Clicking (Layout Load) will apply the selected frame layout to DX-PC For View, and clicking Setup) allows you to set up the user-defined frame layout. (Layout Audio Communication DX-PC For View supports audio communication between the DX-PC For View system and the remote site equipped with two-way audio. [. . . ] The camera name you enter should be the same as the camera name entered under the Property [Camera] tab. The Map panel pops up another screen and displays images of the camera associated with the sensor on the popup screen when an alarm-in event occurs. 51 User's Manual Equipment IP Address/User/Password/Port: Each field is filled in automatically with the information (user ID, password, and port number) set in Site Information Setting. . . , or you can enter it manually. Device No. : Set the device number (1 ~ 32) for each device. If the selected device is a camera, Device No. changes to Camera No. . DVRNS Use: Select Yes to use DVR Name Service, and the DVRNS field appears. Enter the IP address (or domain name) and the port number of the DVRNS server, and the name of the DVR registered on the DVRNS server. NOTE: You should not select numbers that are not supported for devices on the remote DVR when selecting Device No. [. . . ]