User manual MITSUBISHI DX-TL2500E

[. . . ] DIGITAL RECORDER OTHERS INSTALLATION AND OPERATION MANUAL MODEL DX-TL2500E THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER. 1 ENGLISH Features Built-in duplex 16 channel multiplexer The screen mode can be switched on the monitor such as single screen, split4, split9 and split16 screen and sequential screen, split4 sequential screen and split9 sequential screen. ( see page 37) The unit is equipped with the 2 type-output connector to display the different mode split screen on the each of different monitors. ( see page 38) Convenient simultaneous recording-playback function. [. . . ] This function may cause problems during recording and playback. Normally, set this function to "OFF". 1. Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select "IM-CHECK PLAY" in the <HDD SETTINGS> screen. Display the desired setting and confirm. Turn the SHUTTLE ring counterclockwise or press the SET UP button. Select the device for alteration check and then start playback. 2. Turn the SHUTTLE ring counterclockwise or press the SET UP button. o HDD REPEAT PLAY The contents recorded on the HDD (Hard Disk Drive) can be repeatedly played back. Operations 49 ENGLISH s HDD SETTINGS <INITIAL SET UP/INFORMATION> (continued) Warning will also be displayed for parts where recorded data is damaged for some reason. When performing camera sequential playback for video with long recording intervals, the video of the largest camera number selected for recording will be played back the longest. Only the camera number (title) of the pressed camera number button is displayed. Other camera number (titles) will not be displayed. If display is not necessary, select "NONE" in the <CAMERA DISPLAY> ( see page 33). IMAGE MODIFIED( 1 2 3 ) s ARCHIVE When performing complex playback operations with the SHUTTLE ring during alteration check, the "IMAGE MODIFIED" warning may appear. Perform alteration check using playback or playback with changed playback intervals. o FIFO OVERWRITE MODE This function can be set to make repeated archive while deleting parts of previous data in HDD for recording connected to ID4. <HDD SETTINGS> HDD REPEAT REC MAIN ON HDD REPEAT REC SUB OFF HDD REPEAT REC LPA OFF HDD REPEAT PLAY OFF IM-CHECK PLAY OFF SEQUENTIAL PLAY OFF >>FIFO OVERWRITE MODE OFF ARCHIVE SOURCE HDD MAIN ARCHIVE START POSITION RESET o SEQUENTIAL PLAY It is possible to make archive of the video recorded with this unit to an analogue video recorder, etc. , while playing back the video of each camera in order using the single screen display. During single screen sequential playback, the SPLIT/ SEQUENCE button will light. In addition, the playback order/ time of each camera will be the order of the recorded video. <HDD SETTINGS> HDD REPEAT REC MAIN ON HDD REPEAT REC SUB OFF HDD REPEAT REC LPA OFF HDD REPEAT PLAY OFF IM-CHECK PLAY OFF >>SEQUENTIAL PLAY OFF FIFO OVERWRITE MODE OFF ARCHIVE SOURCE HDD MAIN ARCHIVE START POSITION RESET This setting is appeared when "ARCHIVE COPY" is selected on "ID4ID5" of the <INITIALIZATION> screen, and HDD for recording is connected to ID4. Confirm that the ARCHIVE device is correctly connected to ID4 before making FIFO OVERWRITE MODE settings. Settings ( default : "OFF" ) "ON" : Perform repeated archive to HDD connected to ID4. "OFF" : Do not perform repeated archive to HDD connected to ID4. 1. Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select "FIFO OVERWRITE MODE" in the <HDD SETTINGS> screen. Turn the SHUTTLE ring clockwise twice when the cursor is on the left next to "FIFO OVERWRITE MODE". The first turn inverts the "OFF" setting display, and the second makes it flash with a red background. #1 #2 #1 #1. Appears when "ARCHIVECOPY" is set to ID4ID5 on the screen. #2. Appears when "PARTITION" ("LONG PRE-ALARM") is set and "ARCHIVECOPY" is set to ID4ID5 respectively on the screen. Setting ( default : "OFF" ) "ON" : Plays back the video in the single screen sequential mode. "OFF" : Does not play back the video in the single screen sequential mode. Playback is performed during camera sequential play at an interval of 25P. [. . . ] Var drfr mycket frsiktig vid hantering av denna enhet. Undvik att skaka eller stta denna enhet hftigt. Om man gr sdant speciellt under tiden enheten r strmfrd eller under tkomst till hrdvaran kan fel uppst i enheten. Drag aldrig ut stickproppen till ntstrmmen under inspelning/tergivining eller under tiden enheten r strfrd. [. . . ]