User manual MITSUBISHI DX-TL4E

[. . . ] Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E. G. , MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through or ventilation holes not only creates a safety hazard but can also cause extensive damage. PROTECT THE POWER CORD Damage to the power cord may cause fire or shock hazard. If the power cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by holding the main plug. If this unit is moved with the power on status, the built-in HDD may be damaged. [. . . ] When shutting down the DVR, you need to confirm that you want to shut down the unit, you will be asked for an administrator password. NOTE: The Quick Setup mode will be released automatically when the user changes the DVR settings remotely using the DX-PC4E (Remote Operation Software) program. 13 User's Manual Normal Setup Screen Figure 20 -- Normal Setup screen. Press the MENU button to enter the setup screen. If the Quick Setup screen appears, turn it off as described above. The Normal Setup screen gives you access to all the DVR's setup screens. System Information Highlight System Information and press the button. The System Information screen appears. Figure 21 -- System Information screen. In the System Information screen, you can name the site location, assign a unit ID number and button. The System Information select the language to use. Highlight Change and press the Change screen appears. 14 Four-Channel Digital Video Recorder Figure 22 -- System Information Change screen. Highlight the box beside Site Description and press the button. A virtual keyboard displays. Figure 23 -- Virtual keyboard. Use the arrow keys to highlight the first character you want in the Site Title and press the button. That character appears in the title bar and the cursor moves to the next position. Pressing toggles between the upper and lower case keyboards, backspaces, and deletes entered characters. You can use up to 20 characters including spaces in your title. Once you have entered your title, highlight Close and press the button. Highlight the box beside Unit ID and press the button. Change the number by highlighting it and using the arrow buttons to increase and decrease the number. The Unit ID number is used to identify the unit when it is networked with other DVRs. You cannot use the same number for two or more DVRs that are within the same network. NOTE: When the unit ID is set to 0, the infrared remote control will control that DVR without any additional operations. When the unit ID is set to 1 to 4, you must press the ID button on the remote control (1 to 4) to control that DVR. When the unit ID is set to 5 or higher, the infrared remote control will not control any DVRs. Highlight the box beside Language and press button. A dropdown menu displays the available button. Highlight the desired language and press the The box beside H/W Version and S/W Version field displays the hardware and software version of DVR. 15 User's Manual Date/Time Setup Highlight Date/Time in the Main menu and press the appears. [. . . ] Highlight the Sched box and press the described earlier. Set the schedule as Highlight the Alarm Out box and either Beep or the alarm output terminal that you want to associate with the camera that has lost video. Video Loss Event Action (Notify) Setup Screen The DVR can be set to notify the remote site in the case of video loss. Figure 60 -- Video Loss Event Action (Notify) setup screen. 42 Four-Channel Digital Video Recorder Highlight the Sched box and press the described earlier. button. Set the schedule as Highlight the Notify box and press the button. When it is On, the DVR notifies the remote site when it loses video input from a camera based on a defined schedule. NOTE: For the Notify action to work, the DVR should be registered in the DX-PC4E (Remote Operation Software). When the DVR detects video loss, the displays on each associated camera. Display Setup Highlight the OSD, Main Monitoring in the Main menu, and press the on-screen display or camera display on the main monitor. [. . . ]