User manual MITSUBISHI DX-TL910U

[. . . ] DIGITAL RECORDER INSTALLATION AND OPERATION MANUAL MODEL DX-TL910U THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER. 1 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. 2 AVERTISSEMENT DANGER D'LECTROCUTION NE PAS OUVRIR AVERTISSEMENT: POUR LIMINER TOUT RISQUE D'LECTROCUTION, NE PAS OUVRIR LE COUVERCLE (OU LA PARTIE ARRIRE). AUCUNE PIECE RPARABLE PAR L'UTILISATEUR NE SE TROUVE L'INTRIEUR. POUR TOUTE INTERVENTION D'ENTRETIEN OU DE RPARATION SE CONFIER AUX TECHNICIENS QUALIFIS. La flche symbolisant l'clair dans un triangle quilateral a pour objet de tirer l'attention de l'utilisateur sur le fait, qu'il y a des "tensions dangereuses" non-isoles l'intrieur de l'enceinte du produit qui peuvent tre suffisamment importantes pour conduire au risque d'lectrocution. Le point d'exclamation au sein d'un triangle quilateral a pour objet de tirer l'attention de l'utilisateur sur le fait qu'il y a des instructions de mise en service et d'entretien (de rparation) dans les fiches descriptives de l'appareil qui doivent obligatoirement tre respectes. AVERTISSEMENT: AFIN D'VITER TOUT RISQUE D'INCENDIE OU D'LECTROCUTION, NE PAS EXPOSER CET APPAREIL LA PLUIE NI L'HUMIDIT. ATTENTION: POUR PRVENIR LES CHOCS LECTRIQUES NE PAS UTILISER CETTE FICHE POLARISE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT TRE INSRES FOND SANS EN LAISSER AUCUNE PARTIE DCOUVERT. Beginning 3 Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RETAIN FOR FUTURE REFERENCE. [. . . ] When playing back recorded data, please select "MAIN" in the "PLAYBACK DEVICE" setting. 1. Press the SET UP button } <SETTINGS> } Select "MOTION DET REC" in the <RECORD SETTINGS> screen, and display the desired setting. Turn the SHUTTLE ring counterclockwise or press the SET UP button. I PRE ALARM REC The pre-alarm recording can be set. <RECORD SETTINGS> ALARM SETTING RECORD SETTING ALARM REC DURATION >>PRE ALARM REC (S MOTION DET REC ) 5S S ALARM Setting ( default : "0S" ) "0S", "1S", "2S", , "58S", "59S", "60S", "90S", "120S", "150S", "180S" When "0S" is selected, the pre-alarm recording is inoperable. The maximum pre-alarm recordable time is displayed in "( )". Beware that when set the pre-alarm recording time longer than the maximum the settings will turn red. Set the time within the recording time limit, so that the display returns to white. Even if the time is set beyond the limit, Pre-Alarm recording time is not changed. 1. Press the SET UP button } <SETTINGS> } Select "PRE ALARM REC" in the <RECORD SETTINGS> screen, and display the desired setting. Turn the SHUTTLE ring counterclockwise or press the SET UP button. I MOTION DET REC Select whether alarm recording or normal recording is to be started when motion is detected. Operations 47 <TIMER PROGRAM SETTINGS> I TIMER PROGRAM SETTINGS Up to 3 most used operation patterns can be set in advance. Individually setting the camera, recording intervals and recording picture quality for normal recording/alarm recording to A ~ D, settings can be changed instantly by switching operations. Before recording, accurately set the date and cursee pages rent time (for setting the date and time, 24, 25). 8) Select timer setting number (P1 ~ P3) is displayed. 9) SPL (special day of the week setting) The start day of the week and end day of the week are set. When selecting "SPL" in "DW", the period from the start day of the week and end day of the week set here are active. Example : Using program 1 in <TIMER PROGRAM> P2, REC MODE A will record to Wednesday ~ Saturday from 12:30 to 13:00 and "MD" is set to "ON". 1. Press the SET UP button } <SETTINGS> } select "TIMER PROGRAM SETTINGS". <TIMER PROGRAM SETTINGS> >>SELECTED PATTERN P1-SET HOLIDAY SETTING REC MODE A REC MODE B REC MODE C REC MODE D ALARM REC DURATION 5S I TIMER PROGRAM o Structure of the <TIMER PROGRAM> screen 1) 2) 3) 4) 5) 6) MODE ------------------------- 7) 8) P1 MD - <TIMER PROGRAM> DW START END >>1 --- --:-- --:-2 --- --:-- --:-3 --- --:-- --:-4 --- --:-- --:-5 --- --:-- --:-6 --- --:-- --:-7 --- --:-- --:-8 --- --:-- --:-SPL SAT-SUN 2. Check to see that the cursor is to the left of "SELECTED PATTERN" and turn the SHUTTLE ring clockwise twice. 9) 1) PROGRAM NUMBER Up to 8 programs can be set for a single operation. 2) DW The day of week from "SUN" to "SAT" can be set. "DAY" : When recording at the same time daily. "SPL" : When recording the period specified in "9) SPL (special day of the week setting)" below. "HOL" : When setting holidays specified in the <HOLIDAY SETTING> screen. 3) REC START TIME The time is indicated using the 24-hour system. If there is an overlap in the reservation time, the program with the highest program number is given priority for recording. The "P1" display reverses in color when the SHUTTLE ring is turned the first time. When the ring is turned for the second time, the background turns red and flashes. 3. Turn the JOG dial to select "P2" and turn the SHUTTLE ring clockwise. The setting is confirmed and flashing stops. 4. [. . . ] An aluminium disk coated with magnetic materials is used on the surface as the storage medium and since there is no contact during recording/playback, there is no head wear. Data search is also quick since recording is performed in numbered sections called sectors. RS-232C Connection standard used for handling data between devices such as a PC, modem, etc. A standard when connecting a PC and modem. The upper limit for the communication speed of this standard is 115. 2kbps and the maximum transfer distance is 15m. [. . . ]