User manual MITSUBISHI EX53 CONTROL PROJECTOR BY USING A PERSONAL COMPUTER

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MITSUBISHI EX53. We hope that this MITSUBISHI EX53 user guide will be useful to you.

Lastmanuals help download the user guide MITSUBISHI EX53.

Download

You may also download the following manuals related to this product:

MITSUBISHI EX53 BROCHURE (453 ko)

Manual abstract: user guide MITSUBISHI EX53CONTROL PROJECTOR BY USING A PERSONAL COMPUTER

Detailed instructions for use are in the User's Guide.

 [. . . ] (3) The personal computer checks the command and confirms if the sent command has been executed or not. (4) This projector sends various codes other than the return code. When having a control sequence by RS-232C,  reject other codes from the personal computer.  [. . . ] This command will not be executed in Stand-by mode or when the MUTE is executed. This command will not be executed in Stand-by mode or when the MUTE is executed. This command will not be executed in Stand-by mode or when the MUTE is executed. This command will not be executed in Stand-by mode or when the MUTE is executed. This command will not be executed in Stand-by mode or when the MUTE is executed. This command will not be executed in Stand-by mode or when the MUTE is executed. 

72h 72h 76h 76h 64h 6Eh

31h 32h 31h 32h 31h 31h

[Example]

When setting the input signal to COMPUTER 1 (Figures and symbols enclosed in quotation marks are ASCII codes. ):
Status code from the projector Description Command for setting the input signal to COMPUTER 1 Command receipt confirmation (Command echo back)

Sending commands from the PC,  etc. 30 30 5F 72 31 0D '0' '0' '_' 'r' '1' ' '

30 30 5F 72 31 0D '0' '0' '_' 'r' '1' ' '

5) Volume commands (Not executable in stand-by mode. Possible only to read during muting. )
The volume commands are used for the volume setting of this projector with the value. 
ITEM VOLUME ASCII VL HEX 56h 4Ch VALUE 00 - 21

How to set the value
Use the ASCII or the HEX code as shown below to set the value. ASCII '0' '1' '2' '3' '4' '5' '6' '7' HEX 30h 31h 32h 33h 34h 35h 36h 37h '8' 38h '9' 39h

[Example]

When setting the volume to 15 (Figures and symbols enclosed in quotation marks are ASCII codes. ):
Status code from the projector Description Command for setting the volume 30 30 56 4C 31 35 0D '0' '0' 'V' 'L' '1' '5' ' ' Command receipt confirmation (Command echo back)

Sending commands from the PC,  etc. 30 30 56 4C 31 35 0D '0' '0' 'V' 'L' '1' '5' ' '

2

6) Keystone commands (Not executable in stand-by mode. Possible only to read during muting. )
The keystone commands are used for the keystone setting of this projector with the value. The value will vary depending on the installation conditions,  etc. )
ITEM KEYSTONE(vertical) ASCII KS HEX 4Bh 53h VALUE ±20

How to set the value
Use the ASCII or HEX code as shown below to set the value. ASCII HEX '+' 2Bh '­' 2Dh '0' 30h '1' 31h '2' 32h '3' 33h '4' 34h '5' 35h '6' 36h '7' 37h '8' 38h '9' 39h

7) Mute commands (Not executable in stand-by mode. When the mute commands are sent while the splash screen
is being displayed,  the splash screen is only canceled. ) The mute commands are used for the mute setting of this projector with the 0 (30h) and 1 (31h). 
ITEM MUTE ASCII MUTE HEX 4Dh 55h 54h 45h VALUE 0 (OFF),  1 (ON)

8) Remote commands (Not executable in stand-by mode. When the remote commands are sent while the splash
screen is being displayed,  the splash screen is only canceled. ) Some remote control operations can be achieved by the remote command codes. The remote commands have no data codes. 
Button's name on remote + VOLUME ­ VOLUME KEYSTONE MAGNIFY AV MUTE   t s MENU ENTER AUTO POSITION FREEZE ASPECT ASCII r06 r07 r43 r02 ra6 r53 r2b r4f r59 r54 r10 r09 ra4 re2 HEX 72h 72h 72h 72h 72h 72h 72h 72h 72h 72h 72h 72h 72h 72h 30h 30h 34h 30h 61h 35h 32h 34h 35h 35h 31h 30h 61h 65h 36h 37h 33h 32h 36h 33h 62h 66h 39h 34h 30h 39h 34h 32h

[Example]

When displaying the MENU selection bar (Figures and symbols enclosed in quotation marks are ASCII codes. ):
Status code from the projector Description Command operating the same as the MENU button Command receipt confirmation (Command echo back)

Sending commands from the PC,  etc. 30 30 72 35 34 0D '0' '0' 'r' '5' '4' ' '

30 30 72 35 34 0D '0' '0' 'r' '5' '4' ' '

9) Password lock commands
The password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4 to 8-digit password comprised of any figures 1 to 4 added to the end of the data code.  [. . . ] 30 30 76 49 0D '0' '0' 'v' 'I' ' ' Status code from the projector Description Command for checking the input terminal 30 30 76 49 76 31 0D '0' '0' 'v' 'I' 'v' '1' ' ' Check result ( VIDEO)

11) Menu setting commands (Not executable in stand-by mode. Possible only to read during muting. )
The menu setting commands are used for the menu setting of this projector. If the personal computer sends the command without attaching the data code,  the projector attaches to the received command its current setting value as the data code and send it back to the PC. 
ITEM COLOR ENHANCER COLOR ENHANCERUSER-GAMMA MODE COLOR ENHANCERUSER-RGB-COLOR COLOR ENHANCERUSER-RGB-TINT CONTRAST BRIGHTNESS COLOR TEMP.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MITSUBISHI EX53

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MITSUBISHI EX53 will begin.