User manual MITSUBISHI G410

[. . . ] Table of contents Phone overview . . . . . . . . . . . . . . . 2 Keypad layout . . . . . . . . . . . . . . . . . 3 Using this guide . . . . . . . . . . . . 49 Broadcast - cell broadcast (CB) messages . . . . . . . . . . . . . 53 Settings - customizing your phone . . . . . . . . . . . . . . . . . . . . . . . . . 11 Basic phone operations 12 Turning on the phone. . . . . . [. . . ] If not selected, call costs in units will display. To set currency and cost per unit, 1 2 3 4 5 6 7 8 Press Menu . Enter the abbreviated letters of the currency. Enter the cost per unit in the selected currency. The display will confirm your selection. Press Back or to return to the standby display. To set call cost type to units, 1 2 3 4 5 Press Menu . Press Back or to return to the standby display. When the cost type is set to units, the credit limit and the remaining credit are shown in units. Setting the credit limit - in units or currency After setting the currency and cost per unit, if desired and available in your subscription, you can also set a credit limit in units or an amount in the currency of your choice. When the credit limit is reached, the phone cannot make or receive any chargeable calls. This does not prevent the phone from making emergency calls. 1 2 3 4 5 6 Press Menu . The display shows the existing credit limit setting. Enter the credit limit (use to enter a decimal point). Press Back or to return to the standby display. When a credit limit is entered, the 'Credit Limit' selections are Edit or Set No Limit. 45 Show costs 1 2 3 4 5 Press Menu . Use or and to display the cost of the Last call, All calls and the Remaining credits. Press Back or to return to the standby display. The remaining credit is shown in either units or currency as set by Cost Type menu above. Call costs - resetting all costs to zero To reset all the call costs to zero, 1 2 3 4 5 Press Menu . Select Yes to reset the costs or No to exit. If Yes is selected, enter the PIN 2 number and press OK All Costs Reset message displays briefly. Press Back or to return to the standby display. . Alternate line service - selecting Line 2 (subscription service) Some network providers support the use of a second line. This is normally a subscription service and allows, for example, separating incoming and outgoing calls for business or private use. To select the line for outgoing calls, 1 Press Menu . 4 Press Back or Whether Line 1 or Line 2 is selected to make outgoing calls, incoming calls can still be received on either line. 46 Services Call forwarding (network service) Call forwarding service forwards all incoming calls, whether voice, fax or data, to another number. The following menu displays: Action Forwards all incoming voice calls unconditionally Forwards all voice calls only when the phone cannot be reached (out of service) Forwards all voice calls only when the phone does not answer Forwards all voice calls only when the phone is busy Forwards all voice calls only during 3 conditions; When not reachable, On no reply and When busy 1 2 3 Forward options All Voice calls When not reachable On no reply When busy All conditions 4 5 6 7 8 Use or and to select the desired forwarding condition, then press Select . If Names was selected, choose the number to forward your incoming calls to from the Phone Book. [. . . ] 25 Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 S Safety information . . . . . . . . . . . . . . 17 Scratchpad . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Second call . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]