User manual MITSUBISHI HC1100

[. . . ] DLPTM PROJECTOR MODEL HC1100 User Manual HC1100 This User Manual is important to you. Please read it before using your projector. ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. Use the attached RGB cable and RS-232C cable with this equipment so as to keep interference within the limit of a FCC Class B device. [. . . ] AUTO AUTO AUTO OFF English OK IMAGE GAMMA MODE CONTRAST BRIGHTNESS COLOR TEMP. COLOR TINT SHARPNESS BrilliantColorTM SCREEN SIZE VERTICAL LOCATION INSTALLATION LAMP MODE LAMP TIME (LOW) AUTO POWER ON AUTO POWER OFF SPLASH SCREEN BACK COLOR IMAGE REVERSE TRIGGER OUT TEST PATTERN FEATURE ASPECT PASSWORD FUNCTION MENU POSITION CINEMA MODE ? VIDEO SIGNAL SET UP SCART INPUT LANGUAGE RESET ALL CROSS HATCH 1. IMAGE menu ITEM GAMMA MODE SETTING AUTO SPORTS VIDEO CINEMA USER1 / USER2 ±30 CONTRAST ±30 BRIGHTNESS 5 options COLOR TEMP. ±10 COLOR ±10 TINT ±5 SHARPNESS BrilliantColorTM 0-2 SCREEN SIZE 2 options VERTICAL LOCATION ±26 FUNCTION The proper gamma mode is automatically selected depending on the input signal. This is a bright mode suitable for watching sports images. This is a standard mode suitable for watching video images, etc. This is a mode for watching movies in dim lighting as in a theater. (See page 28. ) Use to adjust the contrast of the projected image. (See page 27. ) Use to adjust the brightness of the projected image. (See page 27. ) Use to adjust the color temperature. (See page 28. ) Use to adjust the color thickness of the projected image. (See page 27. ) Use to adjust the color tint of the projected image. (See page 27. ) Use to adjust the sharpness of the projected image. (See page 27. ) Use to adjust the BrilliantColorTM function. Use to adjust the position (height) of the projected image. · BrilliantColorTM uses BrilliantColorTM technology of Texas Instruments in USA. When you set this item to other than 0, the projector displays higher resolution images while reproducing superior colors. · By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See page 26. ) · When the output from HDMI device is set to RGB, COLOR cannot be adjusted. EN-24 2. INSTALLATION menu ITEM SETTING LAMP MODE STANDARD LOW LAMP TIME (LOW) ****H AUTO POWER ON ON / OFF AUTO POWER OFF SPLASH SCREEN BACK COLOR IMAGE REVERSE OFF / 5 - 60min ON / OFF BLUE / BLACK OFF MIRROR INVERT MIRROR INVERT TRIGGER OUT ON / OFF TEST PATTERN CROSS HATCH FUNCTION Select this option when you want to view images in a well-lit room. Select to moderate the intensity of the lamp. The fan operating sound is reduced and the lamp lifetime becomes longer. This item shows a lamp operating time (hour) when LAMP MODE is LOW. [. . . ] · This projector doesn't support video devices having 4 lines (R, G, B, CS*), and 480i, 576i and 480p signals from video devices having 5 lines (R, G, B, H, V). * : Composite Sync Connectors SERIAL (8-pin) 12 COMPUTER IN/COMPONENT VIDEO IN (Mini D-SUB 15-pin) 5 10 1 Pin No. R(RED)/CR G(GREEN)/Y B(BLUE)/CB GND GND GND GND GND DDC 5V GND GND DDC Data HD/CS VD DDC Clock HDMI IN (HDMI 19-pin) 1 19 6 15 11 3 5 1 2 3 4 5 6 2 18 PIN No. 1 2 3 4 5 6 7 8 9 10 SPEC TMDS Data2+ TMDS Data2 Shield TMDS Data2TMDS Data1+ TMDS Data1 Shield TMDS Data1TMDS Data0+ TMDS Data02 Shield TMDS Data0TMDS Clock+ PIN No. [. . . ]