User manual MITSUBISHI HD-5000

[. . . ] Owner's Guide visit our website at NetCommand® 2. 0 HD-5000, HD-5000A w w w. m it s u bi s h i - t v. c om This NetCommand 2. 0 Guide describes specific information for using the NetCommand features of the HD-5000. For any other information regarding the HD-5000, please see the HD-5000 Owner's Guide. This product incorporates copyright protection technology that is protected by U. S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited pay-per-view uses only unless otherwise authorized by Macrovision. [. . . ] For NetCommand compatible satellite receivers, you may also be able to use the number or other additional buttons. · For NetCommand compatible DVD players, the GUIDE button will display the DVD disc menu (not the setup menu). · For Ant-DTV and IEEE devices, pressing the GUIDE button will display the Digital Channel Guide showing the sub-channels, or bitstreams for the current channel or device. For Ant-DTV only the sub-channels for the current channel are seen first. Press ADJUST or to see all the channels in memory. · For compatible traditional VCRs, pressing the GUIDE button when the VCR is highlighted on the Device Selection menu, will change the VCR's input. · For IEEE AV Discs, pressing GUIDE will display the Track List screen (Figure ). · For selected NetCommand compatible A/V Receivers: Display the device selection menu. Press Audio to move the navigation to the audio section and highlight the A/V Receiver icon. Pressing Guide will now switch from analog audio to digital audio and vice versa. NetCommand is able to search to a specific time in an IEEE AV Disc recording. . Start the playback of the desired track on the AV disc. Use the number buttons to enter the time code position of hours followed by minutes. For example, to enter one hour and twenty-two minutes (:) into the track, enter , , . Press ENT(er) to skip to the time code position. To cancel the request or to start over, press CANCEL instead of ENT(er). Track List Screen When viewing an IEEE AV Disc, press the GUIDE button to display the Track List screen. This screen provides a list of tracks for the AV Disc, the time and date the track was added, its duration, and the title of the track. Tracks will be listed in time order with the most recent recording listed first. Press ADJUST or to navigate through the Track List. To play a track, select it on the list, then press ENT(er). Press CH or to change pages of the list. Once a track is selected, the first program begins to play. If there are multiple programs in the track, the names are displayed. [. . . ] · Some device in the IEEE chain is not powered-turn on all the devices. · The device discovery can take as long as a minute to initiate. · IEEE cable is too long (maximum of feet between devices). · The IEEE device uses an incompatible protocol and cannot be discovered. [. . . ]