User manual MITSUBISHI HS-U748

[. . . ] VIDEO CASSETTE RECORDER OWNER'S GUIDE VCR POWER CHANNE EJECT L VOL UME TV POWER MUTE 1 4 7 QUICK PROGRAM 2 CM SKIP 3 6 9 INPUT 5 8 0 PLAY VCR TV REW FF REC PAUSE STOP X2 DISPLAY INDEX AUDIO /VIDEO ADJUST CANCEL ENTER VCR/TV MENU SP/EP ADJUST MODEL HS-U748 This Video Cassette Recorder is based on the S-VHS and VHS formats. Only video cassette mark or the mark may be used with this model. tapes with the Special Features HS-U748 SMART: Program Conflict Warning S-VHS and S-VHS ET record/playback VHS Hi-Fi audio record/ playback FAST: Alfa 500 Precision High Speed Mechanism with for 500x rewind/fast forward speed Rental XpressTM ­ Auto rewind, eject and power off for a fast movie return EASY: ViewPoint® Menu Operating System OTR2 Advanced One Touch Recording with delayed start time Auto Clock Set CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] To correct this, load a tape with its erasure prevention tab intact, and turn off the VCR. ). Do not overlap the recording times you enter into the VCR. If you set two programmed recording times overlap, VCR is already programmed for that time will appear on your screen. Remember that the VCR will record over the next section of tape. If you want to save a tape, remove it and instead use a different tape for a new recording. Your VCR will not record over a tape that has the erasure prevention tab removed. All rental movies have this tab removed, so they are safe from being accidentally erased. REC VCR POWER 1 4 7 2 5 8 0 3 6 9 POWER REC 29 Timer Recording Auto speed programming Use auto speed programming if you want to record as much of the program as possible in standard play (SP) speed, but you want the VCR to automatically switch to extended play (EP) if there is not enough tape left. Auto speed programming is only available for one program. In the first slot, the recording speed default is AUTO. Make sure that the Tape video function matches the length of tape you are using. See Selecting and adjusting the audio and video functions on page 25. At the point where the recording mode changes from standard play (SP) to extended play (EP), some noise may be in the picture or sound when playing the tape. Program caution If your VCR is set to record, but the power is still ON within 3 minutes before timer recording starts, this screen will appear to remind you to turn off the VCR. If the VCR is still turned on 12 seconds before the start time of the recording, that timer recording will be cancelled. program caution REC in 3 min Turn off VCR TV programs that end on the day after If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day, simply set the start time to 11:00 PM on the recording start day and the end time to 2:00 AM. There is no need to change the day of the week. Program skip using menus Sometimes you may want to skip one day of a timer recording but do not want to erase it. Program skip will prevent the recording, for that day only, of a program you have scheduled to record every day or every week. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to skip. Press MENU twice to exit the menus. ¬Program to record CH DAY ON OFF 2 MO11 11:30am 1:30pm 10 TH14 9:00pm 10:00pm § 2 M-F 8:00am 8:30am --- ---:---:-Use STOP to skip on/off ADJUST to select ¥ENTER to enter ADJUST to select SP EP SP SP 2 3 4 To resume recording every day or every week, change the X to the cursor arrow by following steps 1 to 4 again. ¬Program to record CH DAY ON OFF 2 MO11 11:30am 1:30pm 10 TH14 9:00pm 10:00pm X 2 M-F 8:00am 8:30am --- ---:---:-Use STOP to skip on/off ADJUST to select ¥ENTER to enter ADJUST to select SP EP SP SP 30 Timer Recording Program skip using the POWER button If you have entered only one program into your VCR's memory, you can skip the program without going into the VCR's menus. Simply press POWER on the front panel once. The programmed recording light will turn off, and the program will be skipped. [. . . ] Parts used for replacement are warranted for the remainder of the original warranty period. For ninety days from the date of original purchase at retail, we will provide the labor for a warranty repair without charge at an authorized MITSUBISHI service center. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period. 1 TO OBTAIN WARRANTY SERVICE, deliver your VCR to the nearest MITSUBISHI service center. [. . . ]