User manual MITSUBISHI LDT521V

[. . . ] OPERATION MANUAL Important Information DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Mitsubishi Digital Electronics America, Inc. [. . . ] · Use a commercially available signal cable (Mini D-sub 15 pin) for the PC3 input terminal. · Use a commercially available signal cable (BNC) for the PC4 input terminals. Set BNC SELECT of INPUT SELECT on the OPTION menu to PC4 RGB when using the PC4 input terminals. (See Operation guide. ) · Use a commercially available audio cable (mini stereo jack) for the PC audio input terminal. Use an audio cable without resistance. TIPS · Images may not be displayed properly depending on the computer (graphics board) to be connected. · A screen with 1920 x 1080 resolution may not be displayed correctly on PC4. In this case, check the settings of your computer (graphics board) to verify that input signals conform to specifications of this monitor. (See page 17. ) · If there is a check box to disable EDID in display control panel, check it when using PC4. · Use the automatic screen adjustment when a PC screen is displayed for the first time using PC3 or PC4, or when the setting of the PC is changed. (See Operation guide. ) The screen is adjusted automatically when SELF ADJUST in the OPTION menu is set to ON. (See Operation guide. ) E · Use a commercially available signal cable (DVI-D 24 pin) for the AV1 input terminal. Set DVI SELECT of INPUT SELECT on the OPTION menu to AV1 DVI-D when using the AV1 input terminal. (See Operation guide. ) · Use a commercially available HDMI cable (conforming to the HDMI standard) for the AV2 input terminal. Set HDMI SELECT of INPUT SELECT on the OPTION menu to AV2 HDMI when using the AV2 input terminal. In addition, select the audio input terminal to be used in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu. (See Operation guide. ) When DIGITAL is selected, connection to the AV audio input terminal is unnecessary. · Use a commercially available component cable (BNC) for the AV3 input terminals. Set BNC SELECT of INPUT SELECT on the OPTION menu to AV3 COMPONENT when using the AV3 input terminals. (See Operation guide. ) · Use a commercially available S-video cable for the AV4 input terminal. · Use a commercially available video cable (BNC) for the AV5 input terminal. · Use a commercially available audio cable (RCA) for the AV audio input terminals. · The AV1/AV2 input terminals are compatible with the video signals below: 1920 x 1080 p @ 50/59. 94/60 Hz 1920 x 1080 i @ 50/59. 94/60 Hz 1280 x 720 p @ 50/59. 94/60 Hz 720 x 576 p @ 50 Hz 720 x 480 p @ 59. 94/60 Hz 640 x 480 p @ 59. 94/60 Hz · The AV2 input terminal is also compatible with the video signals below: 1920 x 1080p @ 24Hz 720(1440) x 576i @ 50Hz 720(1440) x 480i @ 59. 94/60Hz · The AV3 input terminals are compatible with the video signals below: 1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz, 576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz 10 Connecting Peripheral Equipment Other terminals PC/AV audio output terminals · Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. [. . . ] TMDS data 1TMDS data 1+ TMDS data 1/3 shield N. C. No. 13 14 15 16 17 18 19 20 21 22 23 24 N. C. 1 2 3 4 5 6 7 8 9 10 Function TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 shield TMDS data 0TMDS clock+ No. 11 12 13 14 15 16 17 18 19 Function TMDS clock shield TMDS clockCEC N. C. [. . . ]