User manual MITSUBISHI LDT651L

[. . . ] OPERATION GUIDE Contents Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Displaying the menu screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Menu item details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Adjustments for PC screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Initialization (Reset)/Functional Restriction Setting . . . 11 Controlling the Monitor with a PC (RS-232C) . . . . . . . . . . . . . . 12 PC connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Communication conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Communication procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RS-232C command table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Controlling the Monitor with a PC (LAN) . . . . . . . . . . . . . . . . . . . . . 21 Settings to connect to a LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Controlling with a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 This guide contains instructions regarding operation, settings, and similar details. For instructions regarding connection and installation, refer to the included Operation Manual. Manual Scope - Microsoft, Windows and Internet Explorer are registered trademarks of Microsoft Corporation. - HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. [. . . ] If you are using a Windows PC, use the adjustment pattern on the supplied CD-ROM. Load the supplied CD-ROM into the computer's CDROM drive. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. Eject the CD-ROM from the CD-ROM drive. TIPS · When FLESH TONE is set to LOW or HIGH, C. M. S. -HUE/ -SATURATION/-VALUE cannot be set. · If the display mode on the computer you are using is 65, 000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored. (This is due to the specifications of the input signal and is not a malfunction. ) E 10 Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and restrict operations. After pressing , , and FUNCTION ALL RESET ADJUSTMENT LOCK RS-232C/LAN OSD DISPLAY LED TEMPERATURE ALERT STATUS ALERT OFF UNLOCKED ON ON LED OFF END. . . [MENU] SIZE for about 5 seconds, press in that order. 1/1 , 2. ALL RESET Resets the settings to the factory default settings. , select the resetting method, and then press Press MENU . After initialization, turn the main power switch off and then back on. ALL RESET1 . . . . Resets all the settings to the factory default settings. ALL RESET2 . . . . Returns all settings to the factory default settings except for the following items: LAN SETUP, RS-232C/LAN SELECT, NETWORK, MAIL, and SERVICE & SUPPORT (See page 7, and pages 25 to 28. ) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. 1. . . . . . . . . Disables all operations other than turning power on/off and FUNCTION. 2. . . . . . . . . Only the FUNCTION operation is enabled. Disables all operations other than FUNCTION (not even power on/off). RS-232C/LAN Specifies whether to allow control via RS-232C or LAN (see pages 12 and 21). LED Specifies whether to light power LEDs. TEMPERATURE ALERT Selects the notification method for an abnormal temperature. Do not notify about an abnormal temperature. When an abnormal temperature is detected, the power LED flashes in red and green alternately and the screen displays a message: TEMPERATURE. When an abnormal temperature is detected, the power LED flashes in red and green alternately. STATUS ALERT Selects the notification method for a hardware error. When a hardware error is detected, the power LED flashes in red and the screen displays a message: STATUS [xxxx]. [. . . ] POP SERVER If the "AUTHENTICATION" method is "POP before SMTP", specify the POP server address. ACCOUNT NAME / PASSWORD If the "AUTHENTICATION" method is "POP before SMTP", specify the account name and password to connect to the POP server. TIPS · You can enter up to 64 alphanumeric characters or symbols for the ORIGINATOR E-MAIL ADDRESS, ORIGINATOR NAME, ACCOUNT NAME, and PASSWORD. · The SMTP SERVER and POP SERVER can be up to 64 characters. The following characters can be used: a-z, A-Z, 0-9, - , . E 26 Controlling the Monitor with a PC (LAN) MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notification e-mail to. [. . . ]