User manual MITSUBISHI NM-C150SD

[. . . ] This unit complies with the requirements of the EC Directive 2004/108/EC, "EMC Directive". The requirements for the susceptibility according to EN 55024 and the requirements for interference according to EN 55022 are observed for the operation on residential areas, business, light industrial premises and in small scale enterprises, inside as well as outside of the building. All places of operation are characterized by their connection to the public low voltage power supply system. Warning This is class A product. In a domestic environment this product may cause radio Interference in which case the user may be required to take adequate measures. i Note: This symbol mark is for EU countries only. [. . . ] Password: Enters the user password for connecting to FTP. -JPEG Settings Sets up the creation condition, screen size, color and name of JPEG file to be sent to FTP. Pre event: Creates the JPEG file of chapter 1~5 for 1~2 seconds before the event is generated. Post event: Creates the JPEG file of chapter 1~15 for 1~2 seconds after the event is generated. Image size: Selects the size of JPEG file to be created among 160X120 and 320X240. Color: Selects the color or B&W of JPEG file to be created. Base name: Write in the basic name of file to be created. Except for the basic name, It is possible to add supplementary names for discriminating multiple files. Additional suffix: Selects one among date, time and the number of sequence created. Date Time: Adds the date and time when the file was created behind the basic name. Sequence: Adds the number in sequence of file creation behind the basic name. Event Setup IN-OUT Mapping By connecting the Alarm OUT operations to the events occurred from the Alarm IN, users can send an eMail or FTP Server. Alarm IN - Alarm IN comes in Motion, Alarm in port 1 and Alarm in port 2. Alarm OUT - Alarm: Operate the equipment connected to the Alarm OUT port to the events occurred from the Alarm IN. email: Send an eMail to events occurred from the Alarm IN. - 15 - FTP: Sends the captured picture to FTP by the event which occurs from Alarm input. Enable mandatory alarm out: Enable alarm control to open/close contact. 3. 3. 4 PTZ Setting Basic Control Left or Right button: Go into the sub-menu items. Up or Down button: Navigate through the menu items. - 16 - When mouse in the red area click, It moves with the direction. -PTZ PAN / TILT Speed: It sets a speed when adjusting the Network Dome Camera. The higher a value is, the faster a speed will be. Moving the Zoom handle reactivates Auto Focus mode. Moving the joystick reactivates Auto Iris mode. Zoom: Zoom control. -OSD Zoom: Change value. Exits from currently running functions or menu, error status, etc HOME: Immediately calls Home function. Deletes selected value or function in programming mode CTRL On: Control function. [. . . ] See also Automatic Gain Control (AGC). Preset Programmed video scene, based on a specific pan, tilt, zoom, and focus settings. Up to 80 presets may be programmed for the network dome camera. Privacy Zones Masked areas of the network dome camera's viewing area. These masks prevent operators of the surveillance system from viewing these designated zones. The Privacy Zones move in relation to the network dome cameras pan/tilt position. [. . . ]