User manual MITSUBISHI PD-6150

[. . . ] Owner's Guide Mitsubishi Plasma Display PD-5050 & PD-6150 IMPORTANT SAFETY INSTRUCTIONS (PD-5050/PD-6150) Read before operating equipment Read these instructions. Do not use this plasma display near water. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. [. . . ] Use the buttons to select the NR setting. Use the buttons to change NR. PICTURE : OFF PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR R TINT : OFF NR : MIDDLE COLOR TEMP. :2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL COLORVIEW : ON FILM MODE : NORMAL PICTURE MODE SEL. EXIT RETURN G NR : NR-3 Information NR * "NR" stands for Noise Reduction. * This function reduces noise in the picture. Types of noise reduction There are three levels of noise reduction. The effect becomes stronger as the number increases (in the order NR-1 NR-2 NR-3). OFF: Turns the noise reduction function off. 18 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "HIGH" Press MENU/ENTER button to access MAIN MENU. Use the buttons to select the PICTURE menu and then press the MENU/ENTER button. Use the buttons to select the COLOR TEMP setting. Use the buttons to change COLOR TEMP to HIGH. PICTURE : OFF PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR R TINT : OFF NR : HIGH COLOR TEMP. :2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL FILM MODE : ON PICTURE MODE : NORMAL SEL. EXIT RETURN Changing the Gamma Curve This feature adjusts the brightness of the midtone areas while keeping shadows and highlights unchanged. Example: Setting "2" Press MENU/ENTER button to access MAIN MENU. Use the buttons to select the PICTURE menu and then press the MENU/ENTER button. Use the buttons to select the GAMMA setting. Use the buttons to decrease or increase GAMMA. PICTURE : OFF PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR R TINT : OFF NR : MEDIUM COLOR TEMP. :2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL COLORVIEW : ON FILM MODE : NORMAL PICTURE MODE SEL. EXIT RETURN G G Information Setting the color temperature LOW: Redder MID LOW: Slightly red MEDIUM: Standard (slightly bluer) HIGH: Bluer Information GAMMA settings The picture becomes darker as the number increases (in the sequence of 1, 2, 3, 4). Adjusting the color to the desired level Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality. Example: Adjusting the "GAIN RED" of "HIGH" color temperature Press MENU/ENTER button to access MAIN MENU. Use the buttons to select the PICTURE menu and then press the MENU/ENTER button. [. . . ] THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you. This Plasma Display Panel uses a revolutionary technology, gas plasma, to create the screen image. This technology creates the image using small dots, or picture elements (pixels). [. . . ]