User manual MITSUBISHI PROJECTION TV MODELS WD-52825

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MITSUBISHI PROJECTION TV MODELS WD-52825. We hope that this MITSUBISHI PROJECTION TV MODELS WD-52825 user guide will be useful to you.

Lastmanuals help download the user guide MITSUBISHI PROJECTION TV MODELS WD-52825.


Mode d'emploi MITSUBISHI PROJECTION TV MODELS WD-52825
Download
Manual abstract: user guide MITSUBISHI PROJECTION TV MODELS WD-52825

Detailed instructions for use are in the User's Guide.

[. . . ] Projection Television Models WD-52825, WD-62825 TM Owner's Guide TV Information: Use this space to record the model and serial numbers of your television. This information is on the back of your TV. Model number Serial number TM visit our website at www. mitsubishi-tv. com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This TV is very heavy! [. . . ] This is not a defect of your TV. F i 11. Forg u r e complete ChannelView information to be refreshed daily, the TV must be powered Off between 5 to 15 minutes a day, depending on the number of channels in memory. If the TV loses power, the program listings will be temporarily lost. IMPORTANT 55 NetCommand ® Controlled Recordings Setting up Recordings Figure 13 Through NetCommand, you can automatically start and stop recordings and send signals from one playback device to a recording device. Recordings can be made on recordable devices connected to the TV or to the internal TV Disc. The TV Disc is an IEEE 1394 hard disk drive, with 120 GB of memory and is available for CableCARDTM, Ant 1, Ant 2, IEEE 1394 or tuning devices (cable boxes or satellite receivers) connected to inputs 1, 2, 3 when a PIP or POP is not displayed. The TV can convert digital channels and IEEE 1394 device signals to analog signals that can be recorded on NetCommand compatible analog VHS and S-VHS VCRs. You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30 minute increments). During the recording, the TV can be powered Off. If the TV is powered On, it will be tuned to the source that is being recorded. The TV should remain on this source to ensure the recording continue without interruption. Can be used when viewing Antenna 1 or 2, an IEEE 1394 device including TV Disc, or a non-recording traditional device. Press DEVICE on the remote control to move to the Source Device section. Press ADJUST , , or to select the source device you will record from. If a source is not displayed, it is not available as a recording source. Press ENTER to confirm selection and return to the "Record to" section. In the "Record to" section, review the destination device and duration. Press a second time and the recording will start. Recording Now 1. Press DEVICE on the remote control to move to the Source Device section. Press ADJUST , , or to select the source device you will record from. Press ENTER to confirm your source device selection and move to the Record to section. Press ADJUST or to select the Record to device, duration time, start time (press ENTER after selecting hour, minutes and AM or PM to set the time) and day, using ADJUST or to change, . For devices that can select channels, select the channel. Select Add and press ENTER to add the recording to the record list. [. . . ] If the problem persists please arrange for warranty service. Contact your nearest authorized MITSUBISHI service center whose name and address can be obtained from your MITSUBISHI dealer, by writing at the address provided below, calling MDEA at the 800-332-2119, or use the support feature of our website at www. mitsubishi-tv. com. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either deliver your television to an authorized service location at your own expense, or pay for any travel and/or transportation costs the service center may charge to and from your home. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MITSUBISHI PROJECTION TV MODELS WD-52825

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MITSUBISHI PROJECTION TV MODELS WD-52825 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag