User manual MITSUBISHI SL6U

[. . . ] LCD PROJECTOR MODEL SL6U User Manual This User Manual is important to you. Please read it before using your projector. SL6 EN ­ 1 ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. WARNING Use the attached specified power supply cord. If you use another power-supply cord, it may cause interference with radio and television reception. [. . . ] When AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn't displayed correctly, select the desired video format manually. Choose ON when connecting the projector with a device equipped with the SCART terminal that can output RGB signal. SCART terminal is used mainly in Europe. Select the desired position from among UPPER, CENTER, and LOWER when playing DVD discs containing data of letterboxed images. Use to change the mode of the password lock or to enable or cancel the password lock. Use to select the language used in the menu. ( / English / Español / Deutsch / Français / / / / ) Italiano / RESET ALL . . . . . . . . . Use to reset the menu settings (except IMAGE CAPTURE, PASSWORD, and LANGUAGE ). A · · · · CINEMA MODE can be adjusted only when a TV60 or 480i signal is being displayed. When SCART INPUT is set to ON, nothing is output to the external monitor. When SCART INPUT is set to ON, normal computer signals aren't projected. Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal. · Some AV devices equipped with the SCART terminal aren't compatible with this projector. · When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depending on the input signal in such cases. · When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited. Use to adjust the horizontal position of the image. Use to adjust the vertical position of the image. Use to synchronize the projector with the PC input signal so that the image is not blurred. Use to eliminate image noise such as wide stripes. The projector adjusts its settings automatically when connected to a DVD player equipped with a component video output (Y, CB, CR). When the projector is connected with a device having an RGB terminal, choose RGB manually. [. . . ] Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U. S. A. Phone : +1- (650)572-2700 Fax : +1- (650)572-9675 EN ­ 29 ENGLISH Specifications (continued) Connectors SERIAL (8 pin) 12 COMPUTER / COMPONENT VIDEO IN/OUT (Mini D-SUB 15 pin) IN OUT 5 1 Pin No. R(RED)/CR G(GREEN)/Y B(BLUE)/CB GND GND GND GND GND DDC 5V GND GND DDC Data HD/CS VD DDC Clock Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Spec. [. . . ]