User manual MITSUBISHI T200

[. . . ] Fourth Edition 2000 This manual is published by Mitsubishi Wireless Communications, Inc. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to the programs and/or equipment may be made by Mitsubishi Wireless Communications, Inc. , at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. Printed on recycled paper 1 Table Of Contents Safety Information Phone Overview 1. Getting Started Charging the Battery Attaching the Battery 5 11 12 12 14 Connecting the Charger to the Phone 14 Turning the Phone ON Antenna Caution 2. [. . . ] 3) Press ENTER to select the setting. 2 Ring Tone Default Tone 1 Selects type of ringing tone for incoming calls. 1) Press MENU Tone). 1 2 ABC (Ringer Set - Ring 2) Press UP or DOWN to change the setting. 3) Press 3 Msg Vol. ENTER to select the setting. Default )))) Selects the message tone volume for incoming messages. 1) Press MENU Vol. ). 1 3 DEF (Ringer Set - Msg 2) Press UP or DOWN to change the setting. 3) Press ENTER to select the setting. Default Tone 1 4 Msg Tone Selects the type of ringing tone for incoming messages. 1) Press MENU Tone). 1 4 GHI (Ringer Set - Msg 2) Press UP or DOWN to change the setting. 3) Press ENTER to select the setting. 37 5 Vibrate Selects method of incoming call alert. The settings for this feature are: Ring, Vibrate, and Both. Note:Vibrating mode is only supported when the optional vibrating battery, VBT-P1, is attached. 1) Press MENU Vibrator). 1 5 JKL (Ringer Set - 2) Press UP or DOWN to change the setting. 3) Press ENTER to select the setting. MENU 2 TALK TIMER MENU The Talk Timer appears when a call connects. It shows the duration of the call in hours, minutes and seconds. You can view talk time for the most recent call or for all calls made or received in public and private network channels. · Refer to the TimerReset menu option on page 49 to reset the Talk Timer. 1 Last Talk Displays the talk time of the most recent call. 1) Press MENU Talk). 2 ABC 1 (Talk Time - Last 38 2 Total Talk Displays the talk time of all calls in Public mode. 3 Private Displays the talk time of all calls in Private. 4 Operating Displays the total talk time since activation for all phone numbers or Number Assignment Modules. 1) Press MENU Operating). 2 ABC 4 GHI 2 ABC 3 DEF 2 ABC 2 ABC (Talk Time - Total (Talk Time - (Talk Time - GENERAL SETTINGS MENU 3 The General Settings menu includes Display Contrast, Language, and the Keypad Volume. 1 Contrast Default Normal Adjusts the display contrast. 1) Press MENU 3 DEF 1 (General - Contrast). 2) Press UP or DOWN to adjust the contrast. [. . . ] 58 The calling party number (if available from network) and call time display for the last 10 received calls. 4) Select one of the following options: 1 To Delete: Press 1 (Delete - Yes) to delete the number from the Received Call memory. To Store: Press 2 (Store) to store the number in your phone's memory. Refer to Storing a Number and Name in Memory on page 51 for more information about storing numbers. ABC 1 (Delete All To Delete All: Press 3 Yes) to delete all of the numbers in the Received Call memory. DEF 59 8. PROBLEMS YOU CAN SOLVE Hardware Concerns The phone does not turn on If the phone is new, see "Charging the Battery" on page 12. [. . . ]