User manual MITSUBISHI VS-L46XM70U PRODUCT INFORMATION

[. . . ] Specification Model Name Display Device Display Resolution Viewable Image Size Brightness Contrast Ratio Viewing Angle (H/V) Display Colors Mullion (Total) Back Light Operating Life Optional Input Board Slot VS-L46XM70U TFT LCD (SPVA Mode) 46" (H: 1018. 4 mm/V: 572. 5 mm) 700 cd/m 2 (Typ. )@Bright Mode 500 cd/m 2 (Typ. )@Normal Mode 3000:1 (Typ. ) 178 Degree 7. 3 mm (Typ. )/8. 3 mm (Typ. )* 50000 hrs (Average) x3 RS-232C: D-sub 9 L AN: RJ45 (10BASE-T/100BASE-TX) Control Signal Input D-sub 9 x 2 (IN/OUT) Mitsubishi Original Control Link Wired Remote: F3. 5 Jack IR Receiver (Option) Overlay Function Control S/W (Option) Power Consumption Voltage Range Dimensions Operating Condition Weight Max. [. . . ] Combining a space-saving design and easy video/data integration using slot-in board processing, this display wall system is perfect for the following applications: > Traffic management > Security operations > Power distribution/ Water treatment management > Broadcasting 7. 3 mm mullion (total) Super narrow 7. 3 mm mullion (total) minimizes the image content loss, which is critical for command and control room usage. Internal processing Built-in processor Each display of LCD Display Wall System is equipped with an internal data-processing function that allows to show up to six windows per a single panel, and allows to show up to three windows placed any size and position across the entire wall when using the daisy chain function of the daisy chain board. Install Mitsubishi Ele ctric's D -Wall sof t ware suite and the entire imaging system can be controlled intuitively from a user-friendly graphical user interface. Front access for easy service When used in combination with Mitsubishi Electric's original optional wall mount kit, LCD panels can be accessed from the front-side of the system. This design makes it possible for panels to be serviced from the front as well as the rear. User-friendly graphical user interface (Option) "D-Wall", a software suite developed by Mitsubishi Electric, is available for LCD Wall System. The software was originally created for use with the display wall cube and processor, and has been continuously modified and upgraded. In addition to b asic functions such as wall configuration suppor t, display layout control, and brightness and color control, the following functions for control room use have been incorporated into the latest version. 7. 3 mm High picture quality over the entire wall Digital gradation circuit Mitsubishi Electric's innovative digital gradation circuit provides uniform brightness distribution across the screen, resulting in the reproduction of sharp, vivid images form edge to edge on multi-screen configurations. This virtually eliminates the problem of decreased brightness at the edges of each screen. Redundancy Smart Switch The LCD Display Wall System is also equipped with a "Smart Switch". This signal source control function provides the redundancy necessary for mission-critical applications that require continuous operation. If the signal is unexpectedly lost, the signal source is automatically switched to an alternative device (either "port-to-port" or "board-toboard") within seconds of detecting the `no signal' status. [. . . ] The information for each display is displayed via the GUI. Multilingual interface The D-Wall software suite is available in multiple languages. [. . . ]