User manual MITSUBISHI WD-62327

[. . . ] Owner's Guide Projection Television Models WD-52327, WD-62327 visit our website at www. mitsubishi-tv. com RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure that may be sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. CAUTION CAUTION: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] After adding a channel to the SQV memory, "SQV" will appear under the channel number on the TV screen. To change SQV choices using the menu: 1. Press or when at Channel settings or use the CHANNEL button on the remote control to select the channel you wish to add or delete from a SQV memory bank. Press when at SQV in the menu to move the selector to the On/Off setting. Press or when at SQV setting to select the SQV memory bank you wish to modify. Press ENTER to add (On) or delete (Off) the current channel from the SQV memory bank that you have selected. MAIN MENU View and add SQV channels using the remote control: 1. Use the CHANNEL or number buttons to select the channel you want to add. Press and hold the SQV button for about 3 seconds. When "SQV" and the memory bank number appear under the channel number, the channel has successfully been added. To change the SQV banks using the remote control: 1. To change memory banks, press a number button within 5 seconds of pressing the SQV button. Remove SQV channels using the remote control: 1. Press the SQV button repeatedly until you see the desired channel. CHANNEL EDIT menu ANTENNA Channel Memory Name SQV : Ant A : 002 : Added : KCBS : SQV1 Off 2. While the channel number and SQV indicator are still displayed on the screen, press CANCEL. If CANCEL is not pressed before the SQV indicator disappears, the channel will not be removed. When the SQV indicator disappears, the channel has successfully been removed. ADJUST to select or change option ENTER to confirm CANCEL to cancel Figure 27. SQV button on the remote control 41 V-Chip Lock Menu: Overview V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control. TV ratings apply to programs and movies developed for TV and may have supplemental blocking by content categories. Movie ratings use MPAA ratings for movies released in theaters. V-CHIP EXCEPTIONS: 1. V-Chip is effective only for programs viewed on Ant-A, Ant-B, or from devices connected to Inputs 1-3. It is not effective for programs viewed on devices connected to Component Input or MonitorLinkTM. [. . . ] BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control adjustment. If the problem persists please arrange for warranty service. Contact your nearest authorized MITSUBISHI service center whose name and address can be obtained from your MITSUBISHI dealer, by writing at the address provided below, calling MDEA at the 800-332-2119, or use the support feature of our website at www. mitsubishi-tv. com. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is located within the geographic territory customarily covered by an authorized MITSUBISHI service center. [. . . ]