User manual MITSUBISHI WS-55815

[. . . ] Projec t ion Television Owner's Guide WS-55815 WS-65815 TM TM TV Information: Use this space to record the model and serial numbers of your television. This information is on the back of your TV. Model number Serial number visit our website at w w w. m i t s u b i s h i -t v. c o m CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] If limited data is shown or no program data appears, it is because of limitations from the broadcaster. See Troubleshooting for possible solutions. To record a future program, press ADJUST or to select the channel you want to record from. Press INFO to see the upcoming programs for that channel. Press ADJUST or to move to your program choice. Press REC (record) when your choice is highlighted in ChannelView. A red "R" will be added to the left of the program time. The message, "The recording has been added to the Record List" will display. To view, change or cancel the recording, use the Record List (page 51). The program you selected will be on that list and if digital, will be recorded on the default device you selected in the NetCommand menu. Device Selection Menu For compatible traditional VCRs, pressing GUIDE when the VCR is highlighted on the Device Selection menu will change the VCR's input. When the A/V Receiver icon is highlighted in the Audio Section, pressing GUIDE switches the A/V Receiver from analog audio to digital audio and vice versa. Record To Menu When in the Record To menu, pressing GUIDE will display the current programmed recordings. Please see Record List, page 51 for more infomation. Figure 6. ChannelView screen, current programs For complete ChannelView information to be refreshed daily, the TV must be powered Off between 5 to 15 minutes a day, depending on the number of channels in memory. If the TV loses power, the program listings will be temporarily lost. IMPORTANT 49 NetCommand® Controlled Recordings Record To Setup Figure 8 Your TV is able to start and stop recordings automatically and send the signals from one external playback device to another external recording device. It is also able to convert digital channels and IEEE 1394 device signals to analog signals that can be recorded on NetCommand compatible analog VHS and S-VHS VCRs. You cannot record from an analog channel or device or a VHS or S-VHS VCR to a digital recording device such as a DVCR or A/V Disc. You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30 minute increments). When a digital recording is being made, the TV will direct the signals to the recording device using the IEEE 1394 cable if available, or analog, if not. When an analog recording is being made, the TV will direct signals to the recording device. During a recording, the TV can be powered Off. If the TV is powered On, it must be tuned to the source that is being recorded. Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device. Press DEVICE on the remote control to move to the Source Device section. Press ADJUST or to select the source device you will record from. [. . . ] You further understand that you may be held legally responsible for any copyright infringement or other violation of intellectual property rights that is caused, encouraged, or induced by your failure to abide by the terms of the License. This license is effective until terminated, and will terminate immediately without notice from MDEA or judicial resolution if you fail to comply with any provision of this License. All title and intellectual property rights in and to the Software (including but not limited to any images, photographs, animations, video, audio, music, text, and "applets" incorporated into the Software), and any accompanying printed materials are owned by or licensed to MDEA. All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. [. . . ]